VIEW MY

spannaflicka

Gift Premium Subscription To spannaflicka

Join Date:

06-24-2011

Last Activity:

03-05-2013 10:37 PM

3 Likes on 3 Posts 

    ABOUT ME

  • diesel mechanic
  • black rock EIPA
    Lion Lager
    sugar wash for distilling
  • Mangrove Jacks Classic Gold Lager
  • Mangrove Jacks Classic Gold Lager
  • Engaged
  • Auckland
  • nz

LATEST ACTIVITY

  • Posted in thread: Guide to set internal chest freezer thermostat to >32F; Eliminate external control on 10-15-2012 at 06:15 PM
    Is that yes to all three questions?Yes and yes the two grounds I just joined together

  • Posted in thread: Coffin Keezer List on 10-09-2012 at 08:27 AM
    I was not a member when I built mine but here are a few pics. Finished 8/30/12.That's
    awesome!!! Been a dj mechanic for ten years

  • Posted in thread: Guide to set internal chest freezer thermostat to >32F; Eliminate external control on 10-09-2012 at 08:25 AM
    It just occurred to me. I have an STC-1000 that I ordered recently (in case the manual
    adjustment didn't work).Can I just bypass the freezer thermostat and use the digital
    thermostat?If so, do I just ...

  • Posted in thread: Guide to set internal chest freezer thermostat to >32F; Eliminate external control on 08-26-2012 at 11:16 AM
    After running this method for a month or so I've gone to a stc1000. I was having issues with
    carb levels and keg temp would swing from -2c to 8c. I wired it as a direct replacement for the
    old one and...

  • Posted in thread: Keezer project 12 kegs woot on 07-15-2012 at 08:14 PM
    Maybe construct a chalkboard that just rests on the wood above the taps. That way you can take
    it off when writing or drawing on it.Yea that's going to be the best idea I think. Just a thort
    could I u...

  • Posted in thread: Keezer project 12 kegs woot on 07-15-2012 at 08:10 PM
    HiNow you get to worry about the condensed water dripping out from under the black plastic
    washers and messing up the wood ...BobYea it dose get condensate on the front panel but Being
    an out side bar...

  • Posted in thread: Anybody up for a riddle? on 07-15-2012 at 12:03 PM
    Behind the desk there's Isabel!

  • Posted in thread: Keezer project 12 kegs woot on 07-15-2012 at 06:39 AM
    6831768318My taps are this frosty 24/7 yay no more foam!!!

  • Posted in thread: Keezer project 12 kegs woot on 07-14-2012 at 10:26 PM
    I like that idea but I think it would be a bit low I think it needs to be above the taps Cheers

  • Posted in thread: Alaska keezer build... My first attempt on 07-14-2012 at 09:17 AM
    What size holes should be drilled in the coffin for the shanks to fit threw? What spacing
    between shanks is desired?. I used a 7/8 spade bit and had to slightly screw the shanks in and
    did 4 1/4" spac...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS

PHOTO OF THE DAY