Snood

LATEST ACTIVITY

• Posted in thread: brewery/pub/bar recommendations - NYC, Washington DC, Toronto, Ottawa on 05-07-2013 at 10:16 PM
  That's some great advice guys. I don't think leaving Washington city is really an option. Any
  recommendations for Ottawa or Toronto anybody?

• Posted in thread: brewery/pub/bar recommendations - NYC, Washington DC, Toronto, Ottawa on 05-06-2013 at 10:21 AM
  Hi Guys, I will be Visiting Canada and the USA for the first time this summer. We will be
  visiting Ottawa -> Toronto, -> Washington DC -> Yew York. spending 3 or 4 days in each place.
  I'm looking for ...

• Posted in thread: Pellet hop headache brew - seeking advice using these hops on 03-19-2013 at 10:23 AM
  Hi Guys, a couple of weeks ago i did my first brew using pellet hops, well actually a mix of
  pellet and whole leaf. Up till now I've only used 100% whole leaf without issues. The reason
  for getting pe...

• Posted in thread: help stir plate ! on 09-19-2012 at 08:02 PM
  Buy a new fan, or a new power supply, whichever is cheapest. I have no idea why you didn't get
  a 12v fan and a 12v supply. both very common and cheap.

• Posted in thread: My kegerator build, two tap tower, external gas. on 09-19-2012 at 07:49 PM
  I finished this build last week. I just have a few pictures left to show. The first shows the
  underside of the fridge top. You can see the reinforcement which i've had to cut away to fit
  against the w...

• Posted in thread: Cheap nano Pumps? on 09-17-2012 at 08:41 AM
  are used by homebrewers quite a lot in the UK, and Australia. Very cheap. Not amazing flow
  but it gets the job done.

• Posted in thread: My kegerator build, two tap tower, external gas. on 09-05-2012 at 08:37 PM
  The 90 degree fitting arrived which I need to finish off the beer out line so that i can
  insulate the holes and fit the drip tray fully.Here you can see the line now connected the the
  external bulkhea...

• Posted in thread: My kegerator build, two tap tower, external gas. on 09-04-2012 at 08:20 AM
  Love that gas bulkhead fitting! Any ideas where to source that in the US?I'm afraid I haven't a
  clue. I already had to get the parts from the UK to be sent to my mother as the only place I
  found them ...

• Posted in thread: My kegerator build, two tap tower, external gas. on 09-03-2012 at 10:29 PM
  In order to mound the tower I needed something more solid than the expanded foam insulation of
  the fridge to anchor it to. I got an off-cut of OSB from a colleague which was just the right
  size for my...

• Posted in thread: Beer Line Length and Pressure Calculator on 08-29-2012 at 02:02 PM
  He reposted the link on page 2 here.I'm struggling a little with the line resistance figures
  used in the calculations. for example, for 3/16 line (4.8mm) it's 0.1518 .. does anyone know
  what this mean...