Last Activity:02-17-2014 9:15 PM
Posted in thread: Exhaust Fans on 04-17-2011 at 10:55 PM
I changed the link. It should work now.
Posted in thread: Exhaust Fans on 04-17-2011 at 03:39 PM
I'm stuck between two different exhaust fan options. Can anyone recommend one of these over the
other or at least justify paying double the cost for the vortex fan? Vortex Fan Air Fan
Posted in thread: Outdoor bar Help on 03-10-2011 at 01:44 AM
Then I could just box everything in with marine plywood and pressure treated 2x4's. Did I
over-simplify anything?I'd either do a steel frame covered in corrugated metal or a brick frame
and pour the c...
Posted in thread: splash proofing walls on 02-17-2011 at 03:52 PM
FRP is close to 30 dollars a panel near me BTW. I wish it only cost me 15 bucks, or I would
have my whole bar lined with it!I wish it was $15 as well! This cost me about $100 but was well
worth it. I ...
Posted in thread: brewery thoughts on 02-17-2011 at 03:47 PM
Design an electric system to brew 10 gallon batches and don't look back!
Posted in thread: Cheapest usable saw? on 01-30-2011 at 09:25 PM
Take a look at what's on Craigslist. This might be a good option for you
Posted in thread: Electric brewery plans - need help on 01-18-2011 at 02:52 PM
I guess I'm still having a hard time understanding it. I understand connecting 120v Pos to
ground pops the e-stop but I can't figure out why the resistors are necessary. Is limiting the
Posted in thread: Electric brewery plans - need help on 01-18-2011 at 03:52 AM
What is the purpose of the fuse and resistors on the 120V line of the e-stop?
Posted in thread: Odd GFCI Connections? on 01-14-2011 at 10:17 PM
If you've got the old NEMA 10-30 connectors then depending on who manufactured your main panel
you could remove your two current 30amp breakers and install two 30amp gfci's in their place to
Posted in thread: Show us your element housings/pots. How did you do it? on 01-09-2011 at 03:23 AM
I did the basically the same thing as most of you and placed the O-ring between the plastic box
and the welded fitting. For future reference, it takes a 1-1/4" hole to fit the electrical