Last Activity:08-10-2013 1:23 PM
4 Likes on 4 Posts
Posted in thread: Beginner Welder Mistake?? on 04-04-2013 at 04:28 PM
As others have said, penetration is key and that's something we can't know. If you have your
welder set up to give you penetration for what you're welding, you'll be fine. Don't be fooled
by that stat...
Posted in thread: Beginner Welder Mistake?? on 04-01-2013 at 10:57 AM
Did you bevel your tubing before welding and make sure all your metal was clean? The fact that
you have to ask raises concerns. To be safer, you may want to cut apart one of your welds and
see what it...
Posted in thread: Counterflow Chiller? on 03-15-2013 at 12:22 AM
In my head the copper wire just keeps the copper tubing centered in the outter hose. Thus
making it more efficient and consistent by surrounding the copper tubing with even amounts of
water on all sid...
Posted in thread: Keg / Carboy Washer (yes another) . . . on 03-15-2013 at 12:10 AM
Yes I use a PVC valve off the pump for this to adjust the pressure between carboy cleaning and
keg connections.I use a PVC valve to control flow when I hook up the adapter I use for cleaning
Posted in thread: Where do you get your kegs? on 03-08-2013 at 04:51 PM
I got mine from the local beverage place..........
Posted in thread: Help a kegging N00b! on 03-07-2013 at 10:17 PM
I know with my picnic taps the line was 1/4", not the 3/16" that many recommend and I always
had trouble with foam. Good luck.
Posted in thread: Most bone-headed thing I've done in a while!! on 02-25-2013 at 11:08 PM
If it's any consolation, you have time to do something dumber yet to top this. Ask me how I
Posted in thread: Beer Line Length 5', 10', 15' ? on 02-24-2013 at 02:31 AM
Maybe I missed it, but what's the ID of your lines?
Posted in thread: Getting The Keezer To Work Right on 02-23-2013 at 11:42 AM
you need mass in the keezer to help control the swings, without it you'll have wild
Posted in thread: Bubbles forming in beer lines on 02-20-2013 at 11:05 PM
I've read several posts that support running about 12psi to keep the gas from coming out of
solution also and that's what I run mine at and have no issues.