Last Activity:10-29-2015 6:11 PM
35 Likes on 23 Posts
Posted in thread: MYPIN TA4-SNR Help needed - Temp display wrong and goes down when heat apllied on 09-29-2015 at 02:35 PM
I had tried settings for all type of thermocouples and all behaved the same. My new type K had
a red and blue. Blue ended up being the negative, or at least went to the pole labeled
negative. I am thi...
Posted in thread: MYPIN TA4-SNR Help needed - Temp display wrong and goes down when heat apllied on 09-28-2015 at 03:34 AM
If you have a thermocouple it looks like a type J to me from the colors. Type k thermocouples
are red and yellow.
Posted in thread: Cold Break...from hell? on 09-28-2015 at 03:04 AM
Sometimes i do a no chill in a 5 gallon pyrex carboy and thats how it looks every time. The
first time i saw it it blew my mind.
Posted in thread: Quick and effective way to clean heating element on 09-28-2015 at 02:30 AM
Used this little trick yesterday. Wow! Worked like a charm.Thanks for giving it a try and
reporting back. I'm glad you found this method useful!
Posted in thread: Cfc on 09-25-2015 at 02:48 AM
I was able to find all of the copper parts at home depot. The trick is being able to slip the
tee fitting over the inside pipe. I found this drill bit rasp at the HD too and used it to
drill out the o...
Posted in thread: Mold on oxygen stone on 09-25-2015 at 12:52 AM
You can boil it to sanitize it but i would wrap it in foil and throw it in the oven for 30
minutes at 350 or higher. Dry heat sterilization is your best bet unless you have a pressure
cooker to "autoc...
Posted in thread: Need help sourcing control panel parts on 09-24-2015 at 08:42 PM
This thread has some good info and links in it
Posted in thread: Quick and effective way to clean heating element on 09-20-2015 at 07:34 PM
This has been working well for me so i thought I'd share. Just pull the rope back and forth run
along each ripple.
Posted in thread: Manual PID tuning oddities. on 02-25-2015 at 06:13 PM
[From the horses mouth. Proportional band is in % not degrees.I stand corrected on how the
Mypins express proportional gain. It is not in degrees as I had mistakenly remembered. It is in
%. Looking at...
Posted in thread: Manual PID tuning oddities. on 02-25-2015 at 04:59 PM
For those of you who are not sure how the PID settins are expressed in the Mypin let me
explain. Maybe this will help out anyone that has a mypin and are trying to get their process
dialed in. With th...