SHvanBommel

Gift Premium Subscription To SHvanBommel

Join Date:

11-05-2007

Last Activity:

12-09-2016 8:14 PM

Likes Given: 18

36 Likes on 28 Posts 

LATEST ACTIVITY

  • Posted in thread: {MLT} Bottom dump keggle, professionally welded. on 12-06-2016 at 12:29 AM
    Bottom dump keggle, ready for a RIMS or HERMS integration. Includes brewhardware false bottom,
    compression ring (prevents fb collapse), northern brewer ultimate Sparge arm, welded 1/2npt
    ferrule on si...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 12-02-2016 at 05:57 PM
    Within the software in the "about" section there is a "shutdown" button next to the "donate"
    button... I encourage you to use both buttons.

  • Posted in thread: CraftBeerPi - Raspberry Pi Software on 12-02-2016 at 05:13 PM
    You didn't miss anything, working directly with the developer to make something spectacular.
    Stay tuned!

  • Posted in thread: Show us your Kegerator on 11-29-2016 at 12:11 AM
    ^2" to 1" bushings. The shank sets itself and the nut on the back is big enough to seal the
    hole.

  • Posted in thread: Show us your Kegerator on 11-27-2016 at 05:37 PM
    378451378452378453378454378455378456 I've been kegging for years and finally upgraded my keezer
    to a purpose built unit. It took me no time at all to put this together. I have had more
    satisfaction po...

  • Posted in thread: CraftBeerPi - Raspberry Pi Software on 11-26-2016 at 02:54 AM
    B378278Boards and build documentation to follow.

  • Posted in thread: CraftBeerPi - Raspberry Pi Software on 11-22-2016 at 03:33 PM
    Boards should be arriving by nov 25(dhl told me so) so I'll be sending PayPal requests
    according to the list I published earlier.

  • Posted in thread: CraftBeerPi - Raspberry Pi Software on 11-21-2016 at 03:13 AM
    Right, if you don't have a pi face, you need two relays or ssrs to control pumps. Also...Boards
    shipped via dhl this afternoon. Some weird Hangup with those guys.

  • Posted in thread: CraftBeerPi - Raspberry Pi Software on 11-20-2016 at 03:09 PM
    Sort of. You need SSRs for the pumps as well and you use the outputs of the cbpi boards to
    actuate the relays.

  • Posted in thread: CraftBeerPi - Raspberry Pi Software on 11-20-2016 at 02:36 PM
    Yep

Following Stats
0 COMMENTS
POST A COMMENT