Last Activity:05-24-2016 4:17 PM
Likes Given: 6
1 Likes on 1 Posts
Posted in thread: Hop spacing? and Layout? on 04-19-2016 at 01:49 PM
As long as the base of the nearest string is to feet away from the other variety you should be
good.Did you mean ten?
Posted in thread: Hop spacing? and Layout? on 04-18-2016 at 01:42 PM
This is my first time so be gentle with me.:p I have four different varieties of hops 1 Galena,
2 Columbus, 2 Chinook, 4 Cascade. I plan on making a nice pole and cable trellis for the
Cascade since t...
Posted in thread: DIY clone of the BIAC? on 08-31-2015 at 01:11 AM
I built one just haven't had a chance to brew on it yet. I'm making a walk-in ferm chamber
first I have about $1500 in everything. I'm using a modified hot rod heat stick with biab in
the half barrel ...
Posted in thread: Rolling conical into a chamber on 07-09-2015 at 11:54 PM
I posted a video that has the way I transfer my 17 gallon conical back and forth. It's a simple
wooden roller cart that is the same height as the fridge. It's called conical to keg transfer
Posted in thread: Rolling conical into a chamber on 07-09-2015 at 10:11 PM
I can cold crash reliably down to 38*F with out the a/c coils freezing up and temperature
regulation in the 45-70*F range is ~.5*F with the BrewPi.Prost!This is great to hear, but how
cold is your flo...
Posted in thread: Rolling conical into a chamber on 07-09-2015 at 10:01 PM
shtank:Here's the thread for my build: gallon plastic conical on 2.5" casters, insulated
enclosure with no floor. Cooling with a 5,000 btu window A/C.Hope it helps...Nice build! This
is very similar...
Posted in thread: Rolling conical into a chamber on 07-09-2015 at 08:28 PM
You would need a ramp or a lift. Depends upon the height difference you need to navigate. Why
is there no floor?I assumed the that others who have built these do not put insulation onthe
floor so you ...
Posted in thread: Rolling conical into a chamber on 07-09-2015 at 05:58 PM
After searching for an hour I can only find one build that matches this, and he stopped
updating so I don't know how well this actually work. Anyone have good luck rolling their
conical a fermentation...
Posted in thread: Its finally here!! (Yes, yet another build thread...) on 06-23-2015 at 06:46 PM
Is that your gfci mounted to the panel? I have been thinking about doing the same. Any
Posted in thread: Dual stage walk-in on 06-16-2015 at 02:14 AM
Awesome, thank you for the good advice. Maybe I will take a few pictures when I'm done.