Last Activity:02-19-2014 4:01 PM
2 Likes on 1 Posts
Posted in thread: Kegerator with outlets instead of tap on 02-19-2014 at 04:01 PM
I'd like to rebuild my kegerator + collar and no longer wish to have tap actually attached to
the collar itself. Instead, I'd like to have the kegerator have outlets/valves where I can
attach hoses an...
Posted in thread: Four Kegs One Tap on 07-16-2013 at 01:38 PM
A few blog posts going into slightly more detail:Intro:
Posted in thread: Four Kegs One Tap on 07-08-2013 at 04:00 PM
The check valves sit right above the manifold and were put there to eliminate mixing beers
anywhere other than inside the manifold. Gravity takes care of purging what little does sit in
the manifold a...
Posted in thread: Four Kegs One Tap on 07-06-2013 at 09:03 PM
Electronics:#1 - Raspberry Pi - Arduino - Note the disgustingly bent capacitors sticking out.
I had to replace a few that were nicely soldered in and realized my desoldering skills were
Posted in thread: Four Kegs One Tap on 07-06-2013 at 08:57 PM
Here are some photos...#1 - This is where all the connections come in. The manifold has four
inputs at the top and one at the bottom. The one at the bottom is immediately connected to the
faucet. One ...
Posted in thread: Four Kegs One Tap on 07-06-2013 at 01:25 PM
So of all the plans discussed, what did you end up going with? Something set up to back-clear
the line, or just accepting that you'll get a bit of a mixture for the first pour?I'm trying to
limit the ...
Posted in thread: Four Kegs One Tap on 07-04-2013 at 12:45 PM
Don't forget manual option. Suck if you forget to charge the tablet...I had to create a fairly
convoluted system to get the iPad to communicate with the other electronics. The drawback is it
adds a bu...
Posted in thread: Four Kegs One Tap on 06-27-2013 at 05:28 PM
Update:I'll be putting this together this weekend. I have everything ready to go for the most
part. All of the components are in, except for a few fittings that I'll be getting tomorrow and
Posted in thread: Four Kegs One Tap on 05-19-2013 at 02:21 PM
I have my stuff ordered to test out this idea...I'm going to attach my solenoids very close to
the keg outlets. I'll run some extra line to help out with any foam the solenoids introduce and
each of t...
Posted in thread: Four Kegs One Tap on 05-14-2013 at 11:12 PM
Or to be even more trick, modify the tap so it can ove back/forward/left/right = each direction
= a different beverage!Beer joystick!