Last Activity:09-21-2014 11:24 PM
Likes Given: 2
1 Likes on 1 Posts
Posted in thread: Electrical help needed/explained on 08-06-2014 at 02:48 AM
Loud and clear! Thanks guys!
Posted in thread: Electrical help needed/explained on 08-06-2014 at 01:50 AM
Yea, with all that crazy stuff going on I am forgoing the pot switch. I have adjusted the PID
(Auber Syl2352) for the boil. I have it in manual mode and set to 100% duty cycle until it
Posted in thread: Electrical help needed/explained on 08-05-2014 at 10:40 PM
I have attached a working diagram of my control box. Everything works. I have made 6 batches
with it. I am just fine tuning things. I am trying to control my boil rate a little better. To
have it simm...
Posted in thread: RIMS Tube For Sale on 06-13-2014 at 07:26 PM
I was initially going to build a RIMS brewer but changed to a HERMS. I built this and never
used it. It will accept a standard heating element. The inlet and outlet are 1/2" copper pipe.
It is 21" lon...
Posted in thread: 12v transformer/power supply source on 06-10-2014 at 03:27 AM
I used an old PC power supply. They have 3.3V, 5V and 12V supply. I converted one to power the
electric RV awning on our porch.
Posted in thread: 2 pid, 1 ssr on 06-10-2014 at 02:29 AM
Wiring and testing complete!
Posted in thread: 2 pid, 1 ssr on 06-09-2014 at 05:12 PM
That drawing is exactly what i was picturingThanks! Added both blocks and wired. Working great!
Appreciate the help.:ban:
Posted in thread: 2 pid, 1 ssr on 06-06-2014 at 11:36 PM
Im don't have a way to draw it, but I will try to describe my idea using your image. You have
to get new NO blocks that attach on to the bottom of the switch you have. Then you will run
line 7 from yo...
Posted in thread: Stout Kettles powered by BCS Build on 06-06-2014 at 02:10 PM
Just make a 3 foot pigtail for your pump. I did that for my chugger.
Posted in thread: 2 pid, 1 ssr on 06-06-2014 at 12:17 PM
I used that wiring diagram. Im just not sure how to add the additional NO blocks on the current
switch to control the SSR with 2 PIDs.