Last Activity:07-28-2015 10:01 PM
3 Likes on 3 Posts
Posted in thread: 15/15/30 half barrel RIMS? on 05-07-2013 at 08:58 PM
Depending on the kind of beers you like to brew, a 15 gallon Mt will be pretty small. I use a
15/15/15 setup and my mash tun is full for 10 gallon bathes over 1.06 or so, and nearly full
for 5 gallons...
Posted in thread: why did my keg empty into the bottom of my keezer? on 05-06-2013 at 10:24 PM
I had this happen for the first time not too long ago. I had just replaced the poppet due to a
leak that new orings couldn't fix. It was very stiff and difficult to get the ball lock
connector on. I f...
Posted in thread: Good Hawaiian Beers? on 03-26-2013 at 08:41 PM
Maui Brewings brewpub has a lot more offerings that don't get distributed. Many of them are
better than their standard lineup. Definitely worth a visit.
Posted in thread: Perlick 525ss... Again on 03-20-2013 at 09:30 PM
I recently bought 4 from Adventures in Homebrewing and am very happy. It was the best price I
could find at the time (about 2 months ago).
Posted in thread: CO2 Tank Bought Second Hand - Didn't Get Papers on 03-14-2013 at 09:00 PM
Have you tried other shops? When I bought my 20lb tank, it was out of date. I took it to west
air and they swapped it out without even looking or asking.
Posted in thread: Session IPA recipe advice on 03-14-2013 at 08:55 PM
FWIW my session IPA is mashed low (148F), with an OG of 1.048. I keep the grain bill the same
as I would for an IPA, pale with a very small amount of light crystal. I also really like
FWHing for these...
Posted in thread: Kona Big Wave Golden Ale recipe input . . . on 03-14-2013 at 08:50 PM
The tropical hop aroma was more likely the pineapple used. According to the label, it's brewed
with pineapples, probably used similar to Maui Brewing Cos Mana Wheat. Also, Kona beers are
brewed at 4 o...
Posted in thread: Shanks for Keezer Question on 02-13-2013 at 10:00 PM
As mentioned, go with 4" shanks. I just put 3" ones in mine with a 2x6 collar and they wouldn't
fit with an additional 1" collar. I'd also second getting stainless shanks.
Posted in thread: Brewmaster Controls' - National Homebrew Day Giveaway! on 02-13-2013 at 09:38 PM
Enter me in the Brewmaster Controls National Home Brew Day Giveaway! -
Posted in thread: Cream Ale first time on 02-11-2013 at 10:18 PM
I second the use of WLP080. I use it my cream ale and am very happy with it. I also agree with
the american 2 or 6 row. I use 6-row and flaked corn in mine and couldn't be happier.