SavageBrewer

LATEST ACTIVITY

• Posted in thread: My first run with my all electric brewery on 05-17-2013 at 04:48 PM
  I forgot how much brewing sucks without camlocks.It's not so bad. But, if you know where to
  find some decent priced cam locks I would like to know where to get some.

• Posted in thread: My first run with my all electric brewery on 05-16-2013 at 05:17 PM
  I'm planning an electric brew setup in the future and was wondering how well the Bayou Classic
  pots hold up against the Boilmaker? I plan on using the Boilmaker as my mash tun, but it would
  be cheaper...

• Posted in thread: My first run with my all electric brewery on 05-07-2013 at 05:04 PM
  Thanks. Sorry about the length. I wanted to make sure I covered most of the process.

• Posted in thread: My first run with my all electric brewery on 05-07-2013 at 03:19 PM
  whole brewing process on my new system.

• Posted in thread: Help me rethink the glass carboy on 04-28-2013 at 09:02 PM
  Doesn't sound like a horrible idea on paper. Do you have a source for the components? What, if
  anything, will have to be fabricated/DIY?Cheers! :mug:It definitely will have to be fabricated
  from a man...

• Posted in thread: Help me rethink the glass carboy on 04-28-2013 at 09:01 PM
  Not to impressed with the idea of a fixed location for draining a fermenter. Trub, hops, yeast
  all vary with the style and recipe. I'd like being able to start with the racking cane high and
  lower it ...

• Posted in thread: Help me rethink the glass carboy on 04-28-2013 at 08:45 PM
  Hello everybody. I have come to you for some help and opinions. I recently had an idea for a
  new style of fermentor. The idea came from my wife's tea jug. I thought, "Hmmm, that might make
  a great pri...

• Posted in thread: Spa panel or not? on 01-27-2013 at 12:51 AM
  It's been a while since I updated what I decided to go with. I bought a 50A spa panel from HD
  and wired up a 30A receptacle on it. I added about 20 feet of 10/4 portable cable to it and
  attached a 30A...

• Posted in thread: Any brewers in the laurel/ columbia area on 01-03-2013 at 04:16 PM
  Living in Elkridge. It might as well be Columbia were I'm at. Been brewing for 5 years now.

• Posted in thread: GFCI high current donut? on 01-03-2013 at 05:24 AM
  While searching for gfi breakers for my system I came across this link. anybody tried to use
  this as a panel mounted gfci? If so, how hard is it to wire up in the enclosure? My enclosure
  is finished ...