Last Activity:11-24-2015 8:31 PM
Likes Given: 2
1 Likes on 1 Posts
Posted in thread: Conceptual Brewery Setup - 2 Vessel, 1 Pump, No Sparge on 02-05-2015 at 02:34 AM
My question would be why stratifying would be an issue? The brew kettle heater is cycled based
on a thermocouple installed in the MLT. Whether the wort is heated evenly throughout ending in
a given ou...
Posted in thread: Conceptual Brewery Setup - 2 Vessel, 1 Pump, No Sparge on 02-04-2015 at 09:42 PM
I think as long as the coils are far enough separated that you could wipe them down, it
wouldn't be a problem. The coil would be boiled every use, so contamination wouldn't be a huge
concern. As far a...
Posted in thread: Conceptual Brewery Setup - 2 Vessel, 1 Pump, No Sparge on 02-04-2015 at 09:06 PM
Advantages that I can think of off the top of my head over a traditional BIAB, but as I said
before, it's BIAB without the bag.1. No bag to clean or melt.2. No need for lifting heavy bags
of grain ove...
Posted in thread: Conceptual Brewery Setup - 2 Vessel, 1 Pump, No Sparge on 02-04-2015 at 07:01 PM
All good points. Thank you for taking the time to comment! The drawings are pretty
diagrammatic, and not really representative of what I have envisioned. 1. The coil would
actually be much lower/conde...
Posted in thread: Conceptual Brewery Setup - 2 Vessel, 1 Pump, No Sparge on 02-04-2015 at 05:27 PM
I've been tossing this idea around in my head for a few weeks and crudely sketched it up for
some feedback. I am thinking of doing a two vessel, single pump, single infusion, no sparge
Posted in thread: Golden Gate Keg Coupler on 06-02-2011 at 06:13 PM
Posted in thread: is this a keg/cask on 05-04-2011 at 11:49 PM
If you're interested in filling it, and using it to serve. I have a golden-gate tap lying
Posted in thread: Fermilab on 04-14-2011 at 08:14 PM
I completely thought this thread was going to be about Keep us updated on how this goes, I'm
interested in building a system from similar parts some day.
Posted in thread: What does PCB arcing look like? on 03-27-2011 at 05:13 PM
I wouldn't think that this would be an indication of arcing. In my experiences, arching is
characterized by black deposits at the area of contact. My initial thoughts on why you are
having fuses blow ...
Posted in thread: Stand up freezer build on 03-20-2011 at 07:00 AM
See link: Luck.