Last Activity:07-01-2015 11:28 PM
Likes Given: 6
21 Likes on 15 Posts
Posted in thread: Am I screwed?? on 06-16-2015 at 10:25 PM
...He welded them using a tig welder, with 75% argon 25% CO2 ...This is part of the problem.
100% argon should be used for this work.But yes, as others have said, the weldor's skills are
Posted in thread: The HomeBrewTalk 2015 Big Giveaway! on 03-16-2015 at 10:30 PM
In and In! Thanks!
Posted in thread: What's your E-Keggle boil off rate? on 01-08-2015 at 06:15 PM
I generally aim for 10 L/hr (~2.6 gal/hr) with my system. ~20 gal batches, 10 kW power run at
~65%, 24" diameter pot (non-insulated), with the lid open about 8" or so.
Posted in thread: Camco 5500W ULDW Scorched Back to Back Brews on 01-06-2015 at 02:00 PM
My thoughts are still too much grain particulate in the wort. You need to clarify the wort more
Posted in thread: BrewHardware.com RIMS hardware Kit and more Giveaway! on 01-05-2015 at 05:16 PM
Posted in thread: Another Glycol Chiller Build on 12-19-2014 at 03:39 PM
Rather than adding the complexity of a separate "warm" water/glycol bath, have you considered
wrapping the fermenter with some sort of heater band?
Posted in thread: Camco 5500W ULDW Scorched Back to Back Brews on 12-17-2014 at 03:58 PM
The only time I have scorched an element was when I had a rough time lautering using a large
amount of rye. The kettle ended up with a lot of particulate which eventually burned onto the
Posted in thread: CO2 buildup in the Keezer? on 12-12-2014 at 04:09 PM
It's leaking somewhere. This is not a problem with a system that is working correctly.
Posted in thread: Jockey box question on 11-27-2014 at 03:43 PM
I originally ran my beer through the cold plate twice, but I found it was way too cold.... I
switched it to just go through once.There were no complaints at my wedding when we used this
system with 4 ...
Posted in thread: The SsBrewingTechnologies "Happy HolidaySs" Giveaway! on 11-17-2014 at 07:37 PM
Count me in!