Last Activity:11-10-2013 10:59 AM
Posted in thread: Need brewery/brewpub suggestions for Denver on 08-23-2011 at 12:47 AM
Thanks for the advice!! I know there's way too much to cover in a couple short days, even
without the sightseeing that has to be done.
Posted in thread: Need brewery/brewpub suggestions for Denver on 08-22-2011 at 03:28 PM
Forgot about Great Divide. Stupid me.Rockyard might be a good stop on the way to Pikes Peak,
not sure how I'll fit in Dry Dock...Thanks for the suggestions!
Posted in thread: Need brewery/brewpub suggestions for Denver on 08-22-2011 at 03:31 AM
Going to Denver this weekend, and I want to see if there's any must do's that I'm missing.
We'll have a car, so transportation is covered So far my plan is:WynkoopOdellAveryNew
Posted in thread: Amber Ale Kit to Pumpkin Ale on 08-02-2011 at 01:07 PM
I would leave it in the primary for 4 weeks total, unless you have an additive planned for your
secondary. The oil look might be from your cleaner.
Posted in thread: Amber Ale Kit to Pumpkin Ale on 07-09-2011 at 03:04 PM
You can do a couple of things depending on how you want it to turn out. I made a pumpkin ale
using 30 oz of pumpkin puree that I added cinnamon to taste (not sure how much cinnamon). I
tossed it in wi...
Posted in thread: My side-by-side conversion (yes, this fridge is old) on 06-29-2011 at 02:41 PM
Got the shelves installed in freezer side. Due to the restriction in space at the front of the
freezer I built each post with L brackets first, and then put it all together inside the
freezer. The pos...
Posted in thread: Mash paddle design check on 06-19-2011 at 03:23 PM
The hard part is getting it under control, as the bit wants to run away from you. The best
advice I can give you is to test it out first. Home Depot has cheap 1"x4" at either 6' or 8'
that you can cho...
Posted in thread: Mash paddle design check on 06-18-2011 at 12:25 PM
That looks like it should work just fine.Sweet!!! Thanks for all of your input!
Posted in thread: Mash paddle design check on 06-17-2011 at 06:35 PM
I made some changes to the design. Will this work better?
Posted in thread: Mash paddle design check on 06-11-2011 at 03:18 PM
I might suggest moving the topmost stitch to the bottom position, this will get you a better
cutout along the bottom to help break up doughballs on the bottom of the mash tun.That's
something that I h...