Last Activity:08-23-2013 4:23 PM
2 Likes on 2 Posts
Posted in thread: Synergy Metalworking Single Tier Stand on 04-14-2013 at 02:47 AM
I realize this thread is somewhat old, but considering the synergy system, but also concerned
about distance to the midwest (shipping / support). Anyone have any other suggestions in the
same prices r...
Posted in thread: Issues with Nitro on 10-20-2012 at 02:21 AM
Ok one last question. I just legged a really nice irish red ale that I would like to put on
nitro in short time. My newer process is carb at 1.5 PSI on co2 for about a week while the beer
is at 37ish ...
Posted in thread: Wexford Cream Ale Clone on 10-04-2012 at 07:32 PM
How about any decent Irish cream ale?
Posted in thread: 240v or 120v on 10-03-2012 at 08:47 PM
May I ask what 3000W element you are using, kinda a hard one to find in a screw in application?
Posted in thread: 240v or 120v on 10-03-2012 at 04:07 PM
I found this element on Amazon, its a 3000w Amico and it looks like it attaches by sandwiching
vs a screw type. Any use one of these?
Posted in thread: 240v or 120v on 10-03-2012 at 02:02 PM
So I haven't bought the element yet, but with a 20A 240v circuit I was assuming 2500w should be
enough? Should I be looking at low density?
Posted in thread: Heating Element Mounting Igloo? on 10-03-2012 at 02:33 AM
Well let me ask you this, Since I didn't build it yet, should I? Am I better off going in a
different direction? What are the drawbacks of this design? I brew currently every 1 to 2
weeks, so it will ...
Posted in thread: Issues with Nitro on 10-03-2012 at 02:02 AM
So now that I have the perfect blend of carbing with conjunction of pressure I beginning to
realize mixed beergas does not give you the milage CO2 does. I going through a 5LB tank in less
than one cor...
Posted in thread: Heating Element Mounting Igloo? on 10-03-2012 at 01:51 AM
May I ask what element you were using, Camco? Do you recall the height of the element? Thanks
Posted in thread: 240v or 120v on 10-03-2012 at 01:36 AM
So I picked up the one from Menards but may return it if the consensus is the version from Home
Depot is better and tried-n-true. I did notice my wires are only 12g so the most I can run is
20a even t...