Rocketmagnet

LATEST ACTIVITY

• Posted in thread: Has anyone had a Sestos PID controller working ? on 09-06-2012 at 04:31 PM
  If you have time, would you be able to check if your Sestos is able to do a control period less
  than 8? (Especially less than 3).

• Posted in thread: Has anyone had a Sestos PID controller working ? on 09-06-2012 at 04:30 PM
  Yes, the red 'Out' light on the front of the Sestos came on and stayed on for quite a few
  seconds while the temperature soared about 30ºC above the setpoint. This was way longer than
  the control perio...

• Posted in thread: Has anyone had a Sestos PID controller working ? on 09-06-2012 at 11:42 AM
  Hi aquenne,Thanks for the reply. I'm familiar with PID controllers (I'm a robotic engineer and
  have created many PID controllers myself). I know what the Sestos is supposed to do. My problem
  is that i...

• Posted in thread: Has anyone had a Sestos PID controller working ? on 09-05-2012 at 11:38 PM
  oops, there was a typo in the previous post. Those numbers should have beenCtl Period40 = 40s20
  = 20s10 = 10s8 = 8s6 = 8s4 = 8s3 = 8s2 = 70s1 = 70s0 = 70s

• Posted in thread: Has anyone had a Sestos PID controller working ? on 09-05-2012 at 09:14 PM
  After a bit more experimentation, I am pretty sure there is a bug in the Sestos for low control
  periods. I tried several Ctl values, and recorded the following periods:Ctl Period40 = 40s20 =
  20s10 = 1...

• Posted in thread: Has anyone had a Sestos PID controller working ? on 09-05-2012 at 08:53 PM
  I recently bought a Sestos D1S PID temperature controller, but I am finding it very difficult
  to get it to work as expected. I have poured over the manual, and even read the Auber manual to
  no avail.I...