VIEW MY

RobJ

Gift Premium Subscription To RobJ

Join Date:

07-29-2013

Last Activity:

08-20-2014 1:28 PM

5 Likes on 5 Posts 

LATEST ACTIVITY

  • Posted in thread: Tilting false bottom on 08-20-2014 at 06:28 PM
    Have you considered making a cooper manifold for use in your MLT. Very easy to construct in a
    hexagonal shape a reduces your deadspace to 1/2" or less. Sent from my iPhone using Home BrewHi
    thereSorry...

  • Posted in thread: Tilting false bottom on 08-20-2014 at 06:27 PM
    Have you considered making a cooper manifold for use in your MLT. Very easy to construct in a
    hexagonal shape a reduces your deadspace to 1/2" or less. Sent from my iPhone using Home BrewHi
    thereSorry...

  • Posted in thread: Beer won't hold it's gas?? on 06-27-2014 at 09:56 PM
    Could you explain that one to me? How can "collecting too much" make the beer watery? not
    boiling it down is the problem there.The guy said bleed the gas off and let it sit for a while,
    I said I've st...

  • Posted in thread: Beer won't hold it's gas?? on 06-18-2014 at 08:08 PM
    Thought I would let everyone know, I never realised that you have to keep the co2 line
    connected all the time, I've now got a gas line through the side of my keggerator with a Y
    splitter on. Followed ...

  • Posted in thread: Tilting false bottom on 06-17-2014 at 09:24 PM
    How does getting some hops in a fermenter ruin a batch? Or did something else happen?Hops
    blocked chill plate and couldn't get me hand in to sort it with the wort being a bit warm, it
    was only spoilt ...

  • Posted in thread: Tilting false bottom on 06-17-2014 at 10:00 AM
    I have a similar setup; my MLT has 1.75 gallons of dead space. I correct the mash water volume
    by adding the correct grist to water ratio amount plus the 1.75 gallons to fill the dead space.
    Then I su...

  • Posted in thread: Tilting false bottom on 06-08-2014 at 06:24 PM
    You could also just not care about a thin mash. I've done the exact same recipe as full volume
    mash BIAB and "normal" multi vessel brewing with a thicker mash and sparge, and nobody could
    tell any dif...

  • Posted in thread: Tilting false bottom on 06-05-2014 at 06:15 AM
    I've been trying to get 20" domed bottom like yours but I'm struggling in the UK. I've managed
    to get mine down to 1/2" now, I had to notch the bottom for the 2 outlets then make copper caps
    (had no s...

  • Posted in thread: Tilting false bottom on 05-20-2014 at 05:25 PM
    Can you place a dip tube through your false bottom, and lower the whole thing considerably?
    This is how the domed false bottoms work, for example.Tilting the false bottom shouldn't be too
    much of an i...

  • Posted in thread: Tilting false bottom on 05-20-2014 at 06:19 AM
    I'm starting another thread on this as I've got a thread on hear about my MLT being too wide
    and this problem came up. I've got 2" of 'dead space' under my false bottom, I'm using wort
    pumps to recirc...

0 COMMENTS
POST A COMMENT