riored4v

Gift Premium Subscription To riored4v

Join Date:

01-17-2008

Last Activity:

07-22-2014 10:52 AM

Referrals: 3

9 Likes on 9 Posts 

    ABOUT ME

  • Cars,beer and camping
  • Construction/Commercial Loan Servicer
  • Scott
  • Rock
  • Snatch
  • Californication
  • Silver State Stangs
  • Male
  • In a Relationship
  • Aurora
  • CO

LATEST ACTIVITY

  • Posted in thread: Bottling first sour/brett beer.. on 05-09-2014 at 08:32 PM
    I think lacto and pedio should be treated differently and with more caution, but im not sure
    you can "clean" them off of surfaces that have been in contact with them. Im not sure if that
    is true, but ...

  • Posted in thread: Bottling first sour/brett beer.. on 05-09-2014 at 06:53 PM
    No problem. In thinking about this, I only know that NB pasteurizes to bottle so this might be
    different when kegging, but again im not too sure. If anything, over cleaning wont ever hurt.Do
    these sam...

  • Posted in thread: Bottling first sour/brett beer.. on 05-09-2014 at 04:17 PM
    I would just to be safe. If NB is referring to New Belgium though, their beers are pasteurized.
    Not everything is killed in that process so I would still clean them well, but it wont be as
    likely to i...

  • Posted in thread: Bottling first sour/brett beer.. on 05-09-2014 at 04:04 PM
    Sounds good. Thanks!Off topic (kinda).. but I have a keg of Tart Lychee on tap. I dont know
    exactly what souring yeasts NB used for that beer, but would this same process of hot water,
    PBW, more hot w...

  • Posted in thread: Bottling first sour/brett beer.. on 05-09-2014 at 03:50 PM
    Just star san? What about stuff like BLC? Just thinking that if I was to end up kegging it, and
    running it through my lines, I likely wouldnt run star san through them. Just a warm BLC
    solution and so...

  • Posted in thread: Bottling first sour/brett beer.. on 05-08-2014 at 10:10 PM
    My Brett beer is about where I want it so I'm getting ready to start the process of carbonating
    and bottling.I have seperate racking equipment i've set aside for this, so I'm not worried
    about contami...

  • Posted in thread: Plate chiller brand/size for 15 gallon batches? on 04-21-2014 at 09:21 PM
    Called up Duda and after talking with them I decided on the 40 plate version. Hopefully it gets
    here before the weekend so I can test it out this weekend

  • Posted in thread: Plate chiller brand/size for 15 gallon batches? on 04-21-2014 at 08:40 PM
    If I hadn't stumbled upon a super deal on a Blichman, I was seriously considering the
    Duda....stated results look very good.I'm just convinced there is more to it than number of
    plates...What we need ...

  • Posted in thread: Plate chiller brand/size for 15 gallon batches? on 04-21-2014 at 08:26 PM
    I don't know the plate count either but I know it chills circles around the 40 plate chiller I
    used to have....the flow must be better is all I know.If I pump thru it, I get 10 gallons to 74
    in no tim...

  • Posted in thread: Plate chiller brand/size for 15 gallon batches? on 04-21-2014 at 07:58 PM
    I chill 12 gallon batches direct from kettle to fermenter using a Blichman Therminator.....and
    ice water pumped through it because my ground water seldom falls to 70. It takes 40 lbs of ice
    dumped in ...

FORUM SIGNATURE
Resistance Brewing Co. Resist Crap, Drink Craft!
0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS