Last Activity:11-10-2009 8:55 PM
Posted in thread: Beer Too Warm? on 09-16-2009 at 05:12 AM
2 things stick out to me - how long are the beer lines coming from the keg to the tap?
Depending on thickness, they should be at least 4' in length to keep foaming down. Secondly,
what'st he temperatu...
Posted in thread: new to kegs, but is this ok? on 09-16-2009 at 05:07 AM
If you're planning on kegging, I would recommend going through the Sticky FAQs first. The link
you gave looks like one of those proprietary 'Mr. Beer' type kits that's intended to ease
people into the...
Posted in thread: kegconnection.com - 4 corny kegs for $80? on 09-16-2009 at 04:58 AM
I just went and molested all the kegs I got from the B-grade 4-pack, and yeah I realized they
are a little loose, but it's barely noticeable (at least from this new kegger's perspective). I
Posted in thread: kegconnection.com - 4 corny kegs for $80? on 09-14-2009 at 01:24 PM
I bought a set of these. They were very clean inside, although they still smelled like soda. I
replaced the o-rings and the smell went away. The outsides are really scratched up but not
Posted in thread: how much sugar do i need for priming 5 gals? on 09-12-2009 at 09:39 PM
this and halve it.
Posted in thread: Morebeer or Austin Homebrew? on 09-12-2009 at 04:04 PM
I read most of the posts in this thread, and I'll put in my two cents if it's worth something
to someone.I've bought from pretty much every online HBS, and my favorite so far is AHS. Their
Posted in thread: need high pressure to dispense on 09-12-2009 at 12:58 AM
Well I figured it out. Apparently on the QD's, you have to pull up on the little rubber stopper
around the outside while you're putting it on the posts. I did that and now it's flowing like a
Posted in thread: need high pressure to dispense on 09-12-2009 at 12:41 AM
well nevermind, I just looked at the liquid out QD and noticed it isn't going all the way down
on the post. Lubed them both up pretty nice and the gas QD goes on the post MUCH better but
liquid QD sti...
Posted in thread: need high pressure to dispense on 09-11-2009 at 10:58 PM
Can I bump this one last time? I spoke to KC about it again and they're getting a little
frustrated with me it seems, so I'm trying to find out exactly what it is that's messed up. I
don't want them t...
Posted in thread: need high pressure to dispense on 09-11-2009 at 12:33 AM
I talked to the people at Kegconnection (Ben) and they had me find out what types of kegs they
are by looking at the etching on the outside SS. The only common trend I see is that they all