Last Activity:12-12-2013 6:21 PM
Likes Given: 31
17 Likes on 16 Posts
Posted in thread: Anyone with experience auto tuning auber PID? on 12-12-2013 at 09:17 PM
as the mash settles you might need to open the valve up more, but right off the bat I don't
think running wide open is a good idea. heck I wasn't wide open my last two brews and I got
stuck mashes. -=...
Posted in thread: My Sears Kenmore 8.8cf 6 Tap - How To Thread Lots of Pictures on 12-12-2013 at 09:12 PM
Looks great. Very similar to my build, but your cuts are better :)
Posted in thread: Anyone with experience auto tuning auber PID? on 12-12-2013 at 08:30 PM
no, that most certainly will get you a stuck mash. I know from experience. RIMS tube = slow
re-circulation I ran my auto tune last night and I couldn't get the thing above 149/150 that
was at about 30...
Posted in thread: Sanke D coupler on 12-12-2013 at 08:23 PM
I've had a Sanke D coupler sitting in my pantry for quite a while now. It came with a kegerator
conversion kit I'd bought, but I only needed the parts for corny kegs so. Has the gas tailpiece
Posted in thread: secondary addition of cacao nibs and vanilla beans. on 12-11-2013 at 09:12 PM
Yeah. I did 2 in the boil and 2 in secondary. The first 2 weren't enough in my book. I was
making a peanut butter and chocolate porter. It was pretty awesome!
Posted in thread: Painting the keezer on 12-11-2013 at 09:00 PM
I'd be to worried of the paint getting on stuff in the garage.You think any of these would do
the job, also what do you think looks better Gloss or Flat Black: had the same concern. I got
some of thi...
Posted in thread: secondary addition of cacao nibs and vanilla beans. on 12-11-2013 at 08:54 PM
How much peanut butter powder are you using and how much flavor are you wanting? As a
reference, I've used 4 jars of the stuff and it was a nice peanut butter flavor. Not too strong
but by no means we...
Posted in thread: Painting the keezer on 12-11-2013 at 08:32 PM
This is my search terms "roll on appliance epoxy". To be honest, that stuff is so expensive,
I'd figure out a way to just heat up the area your using and spray paint. I'm guessing you'd
use a garage r...
Posted in thread: Painting the keezer on 12-11-2013 at 07:25 PM
As an additional note since it's on topic, all I did in the way of sanding was hit the whole
thing with a rough sanding block real quick. That epoxy paint is IMPOSSIBLE to get off once
it's dry. I hav...
Posted in thread: Painting the keezer on 12-11-2013 at 07:09 PM
Yeah it is pretty pricey. I used the Rustoleon Spray epoxy, so no I haven't used it. It's the
same stuff though, just roll on instead. It was the first google option, so a little searching