Last Activity:03-14-2015 9:58 PM
1 Likes on 1 Posts
Posted in thread: C02 Line Length Outside Keezer on 05-08-2013 at 04:28 PM
Doesn't matter if it's high pressure 'tween tank and primary, "low pressure" from a primary
feeding a secondary bank, or even "dispensing pressure" hitting a keg. A 7-8 foot line will not
be a problem...
Posted in thread: C02 Line Length Outside Keezer on 05-07-2013 at 04:25 PM
Well the gas line in question be in line between the task and the regulator (very high
pressure), or between regulator and manifold (much lower pressure)? That makes a huge
difference, both in price o...
Posted in thread: Tightening ferrules on 05-07-2013 at 11:27 AM
How about using one or two small silicone o-rings instead of the ferrule?Cheers!This. The steel
ferrules are designed to swage into place permanently. To do this, you need to tighten to
finger tight, ...
Posted in thread: 12v transformer to power PC fan.. dangerous? on 04-21-2013 at 02:36 PM
Oh alright. So I shouldnt break anything by hooking it up? And transformers plug into walls,
right?That power supply plugs into the wall and converts the high voltage AC power into a low
voltage DC ou...
Posted in thread: Keg for fermenter? on 03-24-2013 at 06:49 PM
For the average do-it-yourselfer, cutting larger access in a sanke top creates bigger problems
than it solves. It's certainly been done (IIRC I think YuriRage pulled it off elegantly by
adapting his o...
Posted in thread: Help Me Build A Jockey Box! on 03-20-2013 at 05:39 AM
I came into a bit of luck recently, when a friend was able to save some nifty 316SS coils from
the scrap heap at work (and kindly donate them to me, of
Posted in thread: RensBerserker's Keezer... The RensBerKeezer on 02-20-2013 at 04:17 PM
Rens,a couple of suggestions. Did you put another probe/thermometer in the keezer to check the
accuracy of the temp probe that's feeding your controller?What is your delta T set to? If it's
Posted in thread: RensBerserker's Keezer... The RensBerKeezer on 02-20-2013 at 02:50 PM
Does anybody have any insight into the issues I'm having with my freezer/compressor? To review,
it seems to keep the temp at about 45F, though my temp controller is set to about 42. The
Posted in thread: RensBerserker's Keezer... The RensBerKeezer on 02-20-2013 at 02:47 PM
Nice freakin' job! :mug:Thanks! I owe my inspiration to you, so I appreciate the support.
:DWelcome to the club!That is one sweet build!Much appreciated, Jeebas. While it's still a
Posted in thread: 2012 Simcoe In Stock! on 02-18-2013 at 04:30 PM
Any plans to do Nelson Sauvin in pounds? I see they are available in 4oz packs.