Last Activity:05-03-2014 10:04 PM
Likes Given: 2
6 Likes on 3 Posts
Posted in thread: Show Me Your Wood Brew Sculpture/Rig on 04-20-2014 at 09:00 AM
So I finally finished my brew stand, I took a lot of inspiration from people here. Mine
features a roll out cart on the bottom that holds my mash tun, it pushes back in to hide when
not in use. It's a...
Posted in thread: Re-Seal a Fridge After Removing the Door Guts on 04-06-2014 at 04:36 AM
I found the best solution was to actually retain the outer portion (1/2" or so) of the plastic
door shelf piece. I just used a utility knife to cut out the middle portion.This was after I
Posted in thread: Show Me Your Wood Brew Sculpture/Rig on 04-01-2014 at 07:37 AM
^Lookin' slick. Pretty much exactly what I want to do. I'm nervous of using polyeurathane with
the temperatures of a boil, effectively melting it. Do you plan on putting something between it
and the e...
Posted in thread: Modifying freezer from mini fridge on 03-30-2014 at 03:53 AM
That's looks identical to my converted mini fridge. I was able to snap off the little plastic
clips attaching the evaporator to the top. Then I carefully bent it down and flattened it out a
bit. Just ...
Posted in thread: STC-1000 Delay Confusion on 03-30-2014 at 03:48 AM
Mine flashes the led for "cool" during the delay period. It will be a solid led when the relay
Posted in thread: Need help figuring out how to program cheap controller on 03-09-2014 at 06:14 PM
I considered getting on or those controllers but it looks like they are only single stage, so
you can't have a heating and cooling circuit. I guess the confusing instructions are another
reason to dit...
Posted in thread: Fermentation PID Temp Controller - Cooling AND Heating on 02-10-2014 at 06:59 PM
You guys are right about the PID causing issues with the compressor. Although you can easily
disable the PID function (and lose some fine tuning advantage). I think the best way to use
Posted in thread: Brutus control panel on 02-10-2014 at 12:07 AM
Looks good! What is the STC-1000 for? And how did you cut the square holes?Sent from my iPhone
using Home Brew
Posted in thread: Fermentation PID Temp Controller - Cooling AND Heating on 02-09-2014 at 07:03 PM
My new fermentation chamber is going to use a PID for heating and cooling. I like the PID
function much better than my old STC-1000, which worked, but had temp swings.The alarm function
will work fine...
Posted in thread: My fermentation cabinet build on 01-27-2014 at 07:14 PM
Yeah, good question. The cooling has no problems. I actually got it down to -2 yesterday, just
seeing what it could do. The heating..... well that is a problem right now. I used a seedling
mat but it ...