Last Activity:03-23-2011 5:27 PM
Posted in thread: Trashcan Kegerator on 06-02-2010 at 07:19 PM
Damn, that is what I plan on building this weekend. I was looking at my local hardware store at
the various cans they had. That looks like a rubbermaid 34 gallon can, is that correct?EDIT: I
Posted in thread: Looking for a Wood bar top on 03-23-2010 at 10:35 PM
This will likely be a bit more on the pricey side, and depending on how deep you want the
counter to be....I saw this in an actual bar and it looked amazing, they used a PSL beam,
sanded smooth and la...
Posted in thread: Bar finally under construction! on 09-22-2009 at 05:48 AM
sweet set up, could you post a pic of your draft setup behind the wall. keep up the great work.
can't wait to see the final productI believe in the first page or so is the keezer pics show it
Posted in thread: Bar finally under construction! on 09-21-2009 at 05:30 AM
A few more pics, outlets installed.
Posted in thread: Bar finally under construction! on 09-21-2009 at 05:29 AM
Havent done alot of work on the bar recently, but also havent put any new pics up for a while
so here is an update. The epoxy went on real easy, no issues.Still need to do the outer trim
work and cabi...
Posted in thread: DIY temp controller build on 09-15-2009 at 05:46 PM
interesting, i'm not familiar with an arduino, can you explain a little more? a write up of
yours would be nice to see as well, thanks for the info.Well the Brewtroller guys have also
made it capable ...
Posted in thread: Yet another "Under-the-workbench" Fermentation Chamber Build on 09-03-2009 at 11:17 PM
I work in the construction defect industry, and you will absolutely have to seal the inside of
your chamber to be as airtight as possible.You will get vapor transmission up into the cavity
with the in...
Posted in thread: Bar Finishing on 08-18-2009 at 11:05 PM
rbarr110 - are you using it over something like chainsaw did? I am not really looking to do
that (though we did consider it for a bunch of coasters we have) so probably would need only
enough for 1/16...
Posted in thread: Bar Finishing on 08-18-2009 at 05:18 PM
+1 for epoxy on bar tops.I was going to use the envirotex lite but found a comparable product
locally that they mis-quoted me a price that was cheaper than the envirotex. They realized they
Posted in thread: help on e-HERMS wiring on 08-11-2009 at 10:46 PM
Are your SSR's switched by DC or AC? Brewtroller outputs 12VDC to switch the SSR, your PID may
be using AC and your SSR's are possibly AC, and perhaps thats why they work with the Auber.