VIEW MY

Prymal

Gift Premium Subscription To Prymal

Join Date:

02-19-2011

Last Activity:

05-26-2015 9:38 AM

Likes Given: 1

9 Likes on 6 Posts 

    ABOUT ME

  • Male
  • Married
  • West Richland
  • Washington

LATEST ACTIVITY

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 01-04-2015 at 05:33 PM
    My brewpi is finished and I'll be brewing today. Does anyone see a problem with my rig? Detail
    and tidyness are not my strong points. Do I need to use a temp profile? Is the sample a good
    one roll wit...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 01-04-2015 at 12:57 AM
    and now I have dropped to 0.4 below my set temp and it is still idle.Nevermind, I rebooted the
    whole system and it seems to be working now.

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 01-04-2015 at 12:40 AM
    2 probes both are tracking just fine. beer temp is currently 70.9 (though it started at 72.1)
    and the profile set temp is 70. fridge temp is 59.7. I am guessing the pid is learning how long
    it takes f...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 01-03-2015 at 11:05 PM
    Any advice on difficulties with getting both probes to read? I've tried the other 4, I can
    still only get one reading for some reason. The arduino sees it, but the value is reading
    null.I had the same...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 01-03-2015 at 10:36 PM
    How many probes are you running - and are they all tracking properly (and assigned to the right
    functions?)Cheers!2 probes both are tracking just fine. beer temp is currently 70.9 (though it
    started a...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 01-03-2015 at 09:09 PM
    ok, I got the whole setup going and have a beer in the chamber. I set a profile and my beer
    temp is currently 2 degrees above the set temp but it's been idling for 15 minutes without
    kicking on the co...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 01-03-2015 at 05:25 AM
    Great writeup! I just went through everything and I have a few questions and comments. The
    naming convention that you used is slightly misleading, at least to me. It seems the first file
    that is creat...

  • Posted in thread: HOWTO - Make a BrewPi Fermentation Controller For Cheap on 12-31-2014 at 03:44 AM
    Hey all,Thanks for all of the help getting this set up to make it a pretty easy process for me.
    I did notice a couple of things as i put it together and wanted to add my 2 cents where
    applicable.First...

  • Posted in thread: Help with HERMS and pump cavitation on 12-13-2014 at 08:21 PM
    epic, thanks Bobby trimming that mash pick up tube to a 45 solved my problem 100%.

  • Posted in thread: Help with HERMS and pump cavitation on 12-11-2014 at 05:04 AM
    you know, that might be it. I had to trim the dip tube to fit my system when I got it from you,
    and it's still a pretty tight fit. I'll take off a bit at an angle before I brew this weekend.

FORUM SIGNATURE
Desert Basin Brewery Future Brews: Brett Belgian Tripel Fermenting: Kegged: A Porter is Born, Night Rye-Der Gallons Brewed 2014: 110 Gallons Brewed 2013: 115
0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS