Gift Premium Subscription To prmurphy63026

Join Date:


Last Activity:

01-22-2016 5:49 PM


  • Posted in thread: Panel wiring on 01-12-2016 at 02:51 PM
    Nevermind - I see it now.

  • Posted in thread: Going electric, where to start on 01-06-2016 at 03:59 PM
    Bobby_M at has what you need for

  • Posted in thread: Wiring a auber digital ssr help on 12-11-2015 at 08:30 PM
    So you're planning on a PID for your HLT. You're going to use this to set your strike temp,
    right?And you're going to use the DSPR1 for your BK.Review the manual for the device here: A
    DSPR does not...

  • Posted in thread: Side-by-side IC1800 on 12-07-2015 at 08:55 PM
    Sure! He'd just need to replace the breaker, the wire in the walls (maybe it's rated for the
    amperage for the breaker) and the outlet.

  • Posted in thread: Starting to build an electric setup... on 11-16-2015 at 07:47 PM
    The amount of energy required for a given size volume of water does not change regardless of
    you using 1 240v element or 2 120v elements.Using 2 120v elements is possible and folks do that
    reliably an...

  • Posted in thread: Starting to build an electric setup... on 11-16-2015 at 07:30 PM
    How big are your batches and how much time are you willing to spend waiting for water and wort
    to come to temp?Do a google search for "electricheat.xls". It's an Excel spreadsheet that will
    give you t...

  • Posted in thread: RIMS Build: Some Questions on 06-18-2013 at 03:11 AM
    ok ,so my guess would be your terminal strips need to be jumped across the hot terminal side.
    these terminals are separate, you need to feed each one that I mean each term. needs
    its own powe...

  • Posted in thread: One Last Look at a RIMS in a BOX Wiring Diagram on 03-27-2013 at 03:16 AM
    It is a little confusing to see a mechanical relay symbol used with an SSR label on it.If you
    are in-fact using an SSR to switch your element, it is wired properly.I'm not an electrician,
    but I can re...

  • Posted in thread: I think I want to go electric. on 03-19-2013 at 12:53 PM
    Thanks, I really do love it but propane is expensive, and I use about 3/4 of a tank for every
    11 gallon batch.About a gas fired herms, I would have to use some sort of gas solenoid to
    control it.Maybe...

  • Posted in thread: help on final eherm touches on 12-30-2012 at 04:41 AM
    You could use aluminum cam locks instead of stainless steel. I'd stay with a SS false bottom.