Last Activity:09-24-2015 12:59 PM
1 Likes on 1 Posts
Posted in thread: Freezer closed with equipment = mold on 09-24-2015 at 04:06 PM
Yeah the regulator was on the co2 bottle - so in theory the mold is just on the surface of the
outside - or possible up into the part where the hose attaches to the regulator and on the
closed valve i...
Posted in thread: Freezer closed with equipment = mold on 09-24-2015 at 12:59 PM
I left my freezer closed over the winter with my co2 tank, regulator and hose.It's not awful,
but there's a little surface fuzz and black junk.I'm wondering if I can salvage my regulator
somehow? The ...
Posted in thread: NanoBrewery build on 06-16-2014 at 05:21 PM
How do you like the size building you have?How big are your batches these days?I'm trying to
figure out how to start out both in building size and brew size. I was also thinking of a
roughly 200 sq ft...
Posted in thread: Ever tasted water sitting in Bevlex 200? on 06-13-2014 at 04:42 PM
It's carbon filtered tap water.in theory there shouldn't be chlorine in the water I think.If i
purge the water out of the line and get water from sitting in the keg, that just runs through
the line, v...
Posted in thread: Ever tasted water sitting in Bevlex 200? on 06-13-2014 at 11:12 AM
I made some carbonated water and noticed the water sitting in the Bevlex 200 is terrible.
Obviously it makes me wonder about having beer sit in the beer line between pours. You may not
notice it--I do...
Posted in thread: NanoBrewery build on 06-06-2014 at 11:11 AM
Do you know if the TTB requires the brewery to be some certain number of feet away from your
(or other) residences?
Posted in thread: 1st time using FERMENTAP counter pressure bottle filler on 11-23-2013 at 01:18 PM
I also just tried this for the first time... and it come out awful. It was all foam everywhere.
I am not exactly following your directions other than it sounds like it required a lot of
tinkering on e...
Posted in thread: Exploring "no chill" brewing on 11-08-2013 at 09:25 PM
fwiw I chill my wort in the brew kettle outside overnight with the lid on . It cools down much
quicker outside (even in summer temps, I think the wind helps to cool it) It's not air airtight
but I hav...
Posted in thread: Manual 2 Head counter pressure bottling line on 11-07-2013 at 05:54 PM
So do you do timed fills with the solenoids? 1 button does both co2 and the beer fill? I've
seen the auto filler/capper on ebay. Slick but $$$$$.Thanks!
Posted in thread: Manual 2 Head counter pressure bottling line on 11-07-2013 at 04:21 PM
What ever happened to this bottle filler? Love the idea and would like to do something similar.