VIEW MY

Pinhead

Gift Premium Subscription To Pinhead

Join Date:

01-04-2013

Last Activity:

07-27-2014 10:32 PM

Likes Given: 1

    ABOUT ME

  • Male
  • Married
  • Traverse City
  • Mi

LATEST ACTIVITY

  • Posted in thread: Sterling Gold (3.5% AG, Light and Zesty) on 03-22-2014 at 08:41 PM
    Thinking of making this before I leave for about 5 weeks, My basement is about 63-65 at all
    times, you think this could live in the primary for 5 or so weeks?Sent from my ASUS Transformer
    Pad TF300T u...

  • Posted in thread: Did I ruin my carboy? on 01-19-2014 at 03:08 PM
    I stored my carboy with Oxy Clean in it. Crystals from the oxy clean are now stuck on the
    bottom of my carboy. I normally use a towel attached to a treaded rod in my drill to clean my
    carboy's but it ...

  • Posted in thread: How To Heat a Refrigerator (WTF?) on 12-24-2013 at 04:01 PM
    I live northern Michigan and its cold here. I have the ST1000 set up in a chest freezer with a
    80 watt flood light in it. Works good, light is seldom on when I open it to get a beer

  • Posted in thread: How often to stir mash? on 10-28-2013 at 01:12 PM
    I stirred during my last brew, Its was a version of Moose drool and the build filled my five
    gallon mash turn so I thought I should really get in there and turn it over. It was the first
    time I have e...

  • Posted in thread: Hop Spider...How Big do I Need? on 08-12-2013 at 08:19 PM
    I took a 3 ft piece of metal and cut it in half. drilled hole near one end and put a bolt
    though it so it forms a large v then used a five gallon paint stainer for a bag and attached it
    with zip ties....

  • Posted in thread: Out of beer :-( on 08-12-2013 at 07:32 PM
    Drinking the centennial ale right now. Its my second batch and it seems to please both the
    seasoned home brew fan and newb's I think its my go to beer of everyone. I usually let it sit
    in primary for ...

  • Posted in thread: Problems with Regulator Pressure release valve on 06-26-2013 at 02:56 PM
    I took my tank in to get it refilled. It was my first time and I did not take the value off,
    they removed the value and now whenever you hook it up the pressure release value leaks from
    the hole in th...

  • Posted in thread: 15 Minute Cascade Pale Ale on 05-05-2013 at 03:39 PM
    I just made my second batch and it was not as good as my first. I pitched on an old cake and
    left in primary 3 weeks not four then racked to secondary and dry hopped for a week. Didn't use
    a bag anoth...

  • Posted in thread: Basic 3 tier wood gravity fed brew rig on 04-18-2013 at 10:58 PM
    I like the set and the wheels. My brew set up is much the same, I think I will steal the idea
    but make a two tier and put my stove on the ground then just roll it away after mashing and
    sparging. woul...

  • Posted in thread: Help!! on 04-04-2013 at 12:41 PM
    I used an old plastic ink pen as a fitting in the bucket. cut off a bit of the tip added a hose
    and ran into a jar. Works pretty good I will change to 3 piece when things close down but you
    don't have...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS