Last Activity:09-20-2011 9:05 AM
1 Likes on 1 Posts
Posted in thread: Jim Beam Pool Balls-Tap Handles or ? on 03-05-2011 at 06:15 PM
Special Edition Jim Beam Cue-Balls and 8-Balls. NOS.The 8-balls are 2-1/4 inch.The cue-balls
are 2-3/8 inch. (To work in coin slot tables?)$10 each plus shipping.Drilled & tapped for use
as a tap hand...
Posted in thread: Glass Door Refrigerator Used as Fermentation Chamber on 02-08-2011 at 08:37 PM
Try your search with TRUE & Beverage Air, (2 of the big names) as well.
Posted in thread: Glass Door Refrigerator Used as Fermentation Chamber on 02-08-2011 at 02:57 PM
Hey guy's, I live up here in Fairbanks AK. I have been looking at Craiglist, Alaska's list, in
search of one of these. I have a green light from the Mrs to purchase one when I find it. Just
Posted in thread: Cracked Erlenmeyer Flask on 02-08-2011 at 02:52 PM
The same principle would apply to glass carboys. For optimal safety, any glass item should be
retired after X amount of time/uses.I've never heard of retiring glassware due to thermal
cycling. I used ...
Posted in thread: Cracked Erlenmeyer Flask on 02-07-2011 at 11:37 PM
You would be much better off putting your flask in a pan of water and then heating it. Much
less thermal shock to the flask and even if it all goes to crap and the flask breaks you will
still have the...
Posted in thread: Glass Door Refrigerator Used as Fermentation Chamber on 02-07-2011 at 06:42 PM
Thanks, what type of things should I be looking for in a used unit, other than size, age and
general appearance/condition?Edit: Since this (these?) will eventually house a nice shiney SS
conical and b...
Posted in thread: Glass Door Refrigerator Used as Fermentation Chamber on 02-06-2011 at 07:58 PM
Glass Door Merchandising Coolers work great for fermentation cabinets as well as their intended
purpose.Here's mine with two 6.5 gallon carboys and room for 3 more. There is also two
half-barrel kegs ...
Posted in thread: burn on inside of stainless steel brewing kettle on 02-03-2011 at 02:55 AM
I suggest you do a side by side comparison of stainless steel after using an iron contaminated
media vs clean media.It was already on the list of test patches. With a carbon steel brush, a
Posted in thread: burn on inside of stainless steel brewing kettle on 02-03-2011 at 02:08 AM
When you say used abrasives, have they been used on such things as carbon steel products? If so
I can tell you what the outcome will be. "RUST!"Surface roughness will have no bearing on
corrosion. As ...
Posted in thread: burn on inside of stainless steel brewing kettle on 02-03-2011 at 01:28 AM
You must have a surface roughness tester at work. What brand and model?My prediction is, that
if those were virgin abrasives there won't be much to discern other than the difference in the