Last Activity:07-28-2015 3:17 PM
Likes Given: 4
Posted in thread: Full volume high gravity biab limits? on 04-19-2015 at 11:14 PM
First of all, reaching an OG of 1.068 on a recipe of 1.074 is actually closer to target than
you think, so you did a decent job. The problem with BIAB and high gravity results from grain
Posted in thread: SSBrewTech Announced a New Insulated Mash Tun! on 02-22-2015 at 06:09 PM
Seems nice but i think something in that price range should have triclamp fittings.
Posted in thread: Induction cooker and a PID - doable? on 02-07-2015 at 04:13 PM
You could use the PID in hysteresis mode and that should work, theoretically.
Posted in thread: WTB: Brew Stand, HLT (Missouri) on 12-27-2013 at 02:15 AM
Yes. Single-tier "erector set" type stand. 72" wide with locking casters. Very sturdy. It's
hard-piped with 3/4" galvanized" It has three burners. Two of the burners are the smaller bayou
Posted in thread: WTB: Brew Stand, HLT (Missouri) on 12-24-2013 at 04:03 AM
hey eksf are you still looking for a stand?
Posted in thread: Actuated Sanitary Valves on 12-21-2013 at 03:50 PM
Looking for your thoughts and experience.I'm wanting to use a BCS controller with sanitary
butterfly valves for a CIP brewery. There are plenty of electrically actuated ball valves out
there but not m...
Posted in thread: Keggle mash tun - need advice on 11-12-2013 at 12:16 AM
I've got the same FB and it's awesome. From Nor Cal brewing solutions. Highly recommended.Dip
tube just slips through a hole in the FB, no mechanical connection.
Posted in thread: Plate Chiller, Counterflow Chiller, CIP ball on 11-07-2013 at 11:01 PM
Plate Chiller sold. CIP ball still available.
Posted in thread: Plate Chiller, Counterflow Chiller, CIP ball on 11-07-2013 at 10:33 PM
Agent: I sent you a PMEK: not really
Posted in thread: Plate Chiller, Counterflow Chiller, CIP ball on 11-05-2013 at 03:40 PM
Here are a few more pics of the plate chiller, by request.Note:The blue in the picture is
teflon tape around the bushings.The dark color around the ports is not rust, I think it's just