Last Activity:05-10-2016 12:12 AM
Age:56 years old
Likes Given: 6
29 Likes on 25 Posts
Posted in thread: The HomeBrewTalk 2015 Big Giveaway! on 04-01-2015 at 12:28 AM
Posted in thread: Solid strut single tier build on 11-29-2014 at 11:28 PM
How did you make this gas manifold and out of what?Yep, like Dave said...black pipe from Home
Depot. They had everything I needed from the pipe, connectors, gas valves, fittings, and gas
lines. I used...
Posted in thread: How many gallons of homebrew in 2014? on 11-10-2014 at 12:32 AM
33,254 + 5 gals of Cream Ale = 33,259
Posted in thread: ElectricBrewingSupply 30A BCS Control Panel Giveaway! on 10-30-2014 at 02:08 AM
Posted in thread: Will this sparge arm work for fly sparging? on 10-19-2014 at 08:34 PM
Yes I am using the grid stand. I wanted to be sure I had some dead space since I will be direct
firing under the mash tun and recirculating and don't want to take a chance on scorching
grains. I can a...
Posted in thread: Will this sparge arm work for fly sparging? on 10-19-2014 at 08:25 PM
Good stuff. What have you got there around the pickup pipe..? Since I elongated the hole
through the false bottom which gives me some room to maneuver the dip tube when installing or
removing the fals...
Posted in thread: Will this sparge arm work for fly sparging? on 10-19-2014 at 08:09 PM
My guess is the homebrewing.org guys are just concerned with the damage it could do if not done
properly. Be careful and you'll be fine. Sent from my iPhone using Home BrewGot it done today,
Posted in thread: Will this sparge arm work for fly sparging? on 10-18-2014 at 05:15 AM
I used a 12.5mm hole saw in a drill press. I clamped the PICO in between 2 pieces of wood and
then clamped that to the drill press table to ensure a clean finish. Because I required an
elongated hole ...
Posted in thread: Will this sparge arm work for fly sparging? on 10-17-2014 at 03:30 PM
Also. Has anyone else used a PICO false bottom from homebrewing.org? I'm using a modified
version (modified means it has a hole in it for the pick-up pipe and a scallop cut out of the
edge so it would...
Posted in thread: Solid strut single tier build on 09-24-2014 at 02:20 AM
Looks good, clever way to mount your pumps like that. I would get something to cover them
though, mine sit below a wood "shelf" and they still seem to somehow attract wort!Yeah, I'm
still thinking abo...