Gift Premium Subscription To Peeow

Join Date:


Last Activity:

10-14-2012 1:54 AM

1 Likes on 1 Posts 


  • Single
  • New Plymouth
  • New Zealand


  • Posted in thread: vodka on 08-04-2012 at 07:37 AM
    hi just new to home brewing ive started on kits done a lager , white wine, now I'm half way
    through a red wine I've recently seen a vodka kit has anyone out there made one of these
    before? are they sa...

  • Posted in thread: Another!!! brew stand - original? on 07-27-2012 at 11:30 PM
    Made a start on the control panel and a couple of pics showing the thermowells I made from a
    peice of stainless tube, a couple of nuts and a grub screw. I opted for this as ya just can't
    get cheap the...

  • Posted in thread: Another!!! brew stand - original? on 07-18-2012 at 09:56 AM
    Alright, quick update. My play funds have been low so progress is slow. I did a quick brew with
    the gas burners, decided to go thats what I do. Just been playin round with
    the first p...

  • Posted in thread: Another!!! brew stand - original? on 06-26-2012 at 08:00 AM
    Well, I've got the bug and decided to start building a brew stand. I've decided to save myself
    some stress and make the stand as simple as possible. I've had the thought of using a pre-made
    stand, suc...

  • Posted in thread: Foam!!!! on 05-05-2012 at 04:20 AM
    Bugger! I've got another drama! Finished mowin the lawns, poured a beer and ........foam!!! I
    had it sweet, it was at 12 PSI and all was good. I have a secondary digital regulator inline
    with the gas ...

  • Posted in thread: Foam!!!! on 04-29-2012 at 07:20 PM
    yep, I found the same with mine.

  • Posted in thread: Foam!!!! on 04-28-2012 at 11:38 PM
    Thanks for the advice. I am currently getting it flat againand gonna start over with the advice
    given. Just one more question though, that I havn't found an answer for in the forum. Does it
    make any d...

  • Posted in thread: Foam!!!! on 04-28-2012 at 05:50 AM
    The temp I had it at during the shake and settling has been 4 degrees C (39.2 F). The serving
    line is 2m long (6.5 Foot). It certainly sounds as though I've over done it. Does the gas line
    have any af...

  • Posted in thread: Foam!!!! on 04-28-2012 at 04:57 AM
    Hi, I have just tried doing my first kegged brew. I carbed it by chuckin 30psi down the outlet
    valve (corny keg), shook it until it stopped gurgling, and then a little while longer. Left
    that over nig...

  • Posted in thread: Fridge In Cabinet on 04-13-2012 at 12:04 AM
    I have just found a very short clip on Youtube showing a similar set up, it's not the best vid,
    but you can see what I'm talking about.[ame]