Paulinuke

LATEST ACTIVITY

• Posted in thread: Drip... Drip... Drip... Leaky faucet! on 06-10-2008 at 07:28 AM
  What I would try is to take the faucet apart, clean it up real well and put it back together
  using a small amount of keg lube on all the seals. If that doesn't fix it you may have a
  defective faucet. ...

• Posted in thread: Forward Sealing Faucets worth it? on 06-09-2008 at 11:53 PM
  I use the starsan trick on my standard faucets because I got them for free. If I use a faucet I
  srap 2 squirts of starsan into when I am done for the night and I have never had a faucet
  stick, and I s...

• Posted in thread: Finally finished by Keezer (Pics) on 05-21-2008 at 01:45 AM
  I have kind of an unrelated question. I see you have rootbeer on tap and that you are using a
  very long line to dispense to prevent foaming due to higher pressure. I also have rootbeer on
  tap and I ha...

• Posted in thread: Kegged Dunkelwiezen on 04-06-2008 at 11:30 AM
  About two months ago I kegged a batch of dunkelwiezen. It is tasing better everytime I try it.
  The problem is that all the yeast has settled out to the bottom of the keg and my bear is
  pouring dark bu...

• Posted in thread: Perlick Forward Seal Faucet vs Standard Chrome faucets on 03-20-2008 at 07:17 AM
  I am sure you guys with the sticking faucets have heard this before but just in case I will
  post it again. I have 5 standard chrome faucets on my kegerator and sometimes a tap won't be
  used for weeks,...

• Posted in thread: kolsch/honey kolsch on 03-20-2008 at 01:15 AM
  I brewed the honey Kolsch kit a while back and just had it on tap for our engagement party and
  that beer was the biggest hit of everything I had to include commercial beer. The only thing I
  wasn't thr...

• Posted in thread: CO2 leak question on 03-05-2008 at 10:03 PM
  I think I fugured out what happened with my leak. I am fairly certain that when I closed the
  lid on my kegerator the beer lines came in contact with the pressure relief valves of the
  regulators and ca...

• Posted in thread: CO2 leak question on 03-05-2008 at 10:01 PM
  For your problem I think teflon tape is in order. I would take the fitting out of the regulator
  and clean off all the threads, then reassemble everything giving any threaded fitting 4-5 wraps
  of teflo...

• Posted in thread: CO2 leak question on 03-03-2008 at 09:03 AM
  Here is what I have. Five tap kegerator/freezer. Tap 1 is soda running at 35 pounds off the
  second regulator body. Taps 2-5 are beer running at 13 pounds off of the first regulator body
  that is connec...

• Posted in thread: Beer line taste on 03-01-2008 at 11:18 AM
  The keg is being used for rootbeer. It is a rebuilt keg with all new o-rings. I previously used
  a much shorter line and would turn off the CO2 and vent the pressure before pouring. Using this
  method I...