Last Activity:05-26-2013 12:11 PM
Posted in thread: Cheap compact wort pump on 04-03-2013 at 11:48 AM
just my 2 euros worthI have a tan coloured pump bought from solarpumps.co.uk very good customer
service as said by alienit is the sp20/20 model.they are used a lot by uk and aussie brewers
the only do...
Posted in thread: another recirculating biab question on 03-22-2013 at 06:38 PM
I am finally at the end of my 4500 watt recirculating biab build .I have one more build
question.how much space do I need to leave between the element and my false bottom style bag
support(it is a per...
Posted in thread: recirculating BIAB where to put my probe on 03-17-2013 at 11:37 AM
well I have made the decision to put my probe in the pot opposite the element .If it turns out
wrong I am adding a sight gauge later anyway so the hole is not wasted if it is ok I will go
with a tee f...
Posted in thread: question for PJ on 02-28-2013 at 01:54 PM
having looked at the auberin PID manual online as I had read the sestos is very similar ,I
found you can control the output manually just like the Auberin one .You need to change one
perameter and the...
Posted in thread: question for PJ on 02-25-2013 at 07:55 PM
thanks again PJ for your quick responsemy pid as a sestos one which like the auberin one has a
manual percentage setting but I sort of feel the control via a pot is more sensative and I
could react to...
Posted in thread: question for PJ on 02-25-2013 at 02:04 PM
thanks pj sorry about the slow reply my RCCB circuit breaker trips at 30 mA so your 4000 ohms
would give 60 mA so ok I thinkAnother question I would like to use a phase angle ssr to control
the boil a...
Posted in thread: recirculating BIAB where to put my probe on 02-24-2013 at 09:24 AM
electric with camco 4500 watt element
Posted in thread: recirculating BIAB question on 02-21-2013 at 11:43 AM
jeffmeh that would do the trick I think but they dont appear to ship internationally.I need to
search for another supplier who doesedit found one but shipping is a killer item 7$ shipping
Posted in thread: scorching...what the ... on 02-21-2013 at 11:18 AM
my camco 4500 watt ulwd element is 1" npt thread which is about 1 3/16 hole size .the electric
brewery build uses a 11/4 chassis punch for the hole in the kettle wallhope this helpsPaul
Posted in thread: recirculating BIAB question on 02-20-2013 at 06:46 PM
I plan to try recirculating using a grain bag and using some form of support under the bag.My
heating is via electric 4500 watt element.my question is if I was to use a false bottom (2 mm
holes 30% op...
- Red Rye Ale
- Strange fermentation behavior
- How many gallons of EdWort's Apfelwein have been made?
- Grassy Dry Hops
- Cheap compact wort pump
- Cocoa Powder - TO BOIL OR NOT TO BOIL
- Small space experiment in Boston
- Local beer swap-o-rama!
- Where can I find day neutral rhizomes?
- Brew tree house!!
- Newbie Question Regarding Water Temperature Regulation