Gift Premium Subscription To papajuan

Join Date:


Last Activity:

10-25-2012 5:24 PM

1 Likes on 1 Posts 


  • Single
  • Duluth
  • MN


  • Posted in thread: Red Beer (as in beer + tomato juice) on 10-14-2012 at 07:20 PM
    People put tomato juice in BMC to add some taste, If Your HB needs tomato, you need a different
    HB recipe.

  • Posted in thread: reusing coors light home draft system on 05-04-2012 at 09:00 PM
    The biggest mistake I made when I salvaged the Coors Lite Home Brew was to removed the Coors
    label from the bottle. Most of my friends and family would never touch anything with a Coors
    label on it.

  • Posted in thread: Miller/Coors Home Draft Co2 Cartridge Question on 05-03-2012 at 04:31 AM
    The rubber seal that the 9mm neck CO2 cartridge fits into can be removed from the regulator. I
    replace it with a length of 5/16id X 7/16od vinyl tubing about 7/16 inch long. I can now use
    the small ne...

  • Posted in thread: Miller Home Draft System on 04-20-2012 at 03:01 PM
    Koolatric make a thermoelectric cooler with inside dimensions of 12h X 8w X 12d, the
    Miller/Cores - T-a-D bottles are 7"dia X 12" long. I believe with the tap the bottle is 16"
    long. That looks like a...

  • Posted in thread: Craigslist score - how to adapt for cornies and kegerator on 04-19-2012 at 08:10 PM
    All that engineering and no DUCT TAPE

  • Posted in thread: kegerator cooler for camping... on 04-19-2012 at 07:04 PM
    The lid on the 60qt cooler will close with the ball lock connectors on one 2.5 gallon corny
    keg.You can get two 2.5 gallon kegs in the 60qt cooler if you have one with connectors and one
    without conne...

  • Posted in thread: CO2 or beer gas on 04-19-2012 at 04:21 AM
    Wouldn't a larger ID beer hose work the same way to balance the system. All of the long narrow
    pub/bars I've been in only had beer taps at one location, directly above the keg/cask storage

  • Posted in thread: I think my 2.5 gallon keg blew up!!! on 04-13-2012 at 08:27 AM
    I use 100grams (1/2C) in my 5 gallon corny for priming and after 3 weeks @ room temp (65F) I
    have about 27 to 29 PSI.

  • Posted in thread: Soda dispensing system on 02-19-2012 at 12:17 AM
    I'm using a 2 1/2 gallon corny keg as a big seltzer bottle.I put about 1 1/2 gallons of water
    in the keg, set the CO2 at 35PSI and shake the keg for a few minutes, disconnect the CO2
    leaving the keg w...

  • Posted in thread: Best way to fill corny keg? on 02-18-2012 at 12:52 AM
    I clean and sanitize the keg, drain out all of the sanitizer, install the lid, pressurize to
    seat the seal and leak check the keg. When it's time to fill I dump the pressure, install an
    open gas in ba...