Last Activity:11-16-2016 11:04 PM
4 Likes on 3 Posts
Posted in thread: Who makes custom kettles with TC port ON BOTTOM? on 10-18-2016 at 05:01 PM
I had Sabco weld custom TC kegs for me about 10 years ago, before all this newfangled stuff
came to market. Today, I'd probably buy a kettle and pick up either weldless or solder fitting
from Bobby M....
Posted in thread: inr brewing - basement brewery build on 02-06-2016 at 02:34 AM
I've always just put stranded wire into anything with a pressure plate. Anytime you daisy chain
stuff together, I can see a benefit to spades over trying to secure two wires into a single
Posted in thread: inr brewing - basement brewery build on 01-27-2016 at 03:52 AM
I hit mine with a coat of primer, then the same hammered metal paint that's on Kal's site.
Beige/gray just doesn't do it for me. I spent a good 10 minutes staring at all the spray paints
trying to fig...
Posted in thread: RIMS is driving me crazy! Help! on 12-26-2015 at 04:00 AM
What BrunDog said. Running it at 240v is a recipe for disaster. That'd give you a 6000 watt
Posted in thread: Mash/BK Control Boxes: Liquid level switches on 11-26-2015 at 04:03 AM
Finally wrapped up new controllers after ordering the parts 6 months ago. Built my original
control panel 5+ years ago, and decided it was time to upgrade. I'm a fan of home audio
equipment, so I went...
Posted in thread: Chugger Pump not pumping on 05-15-2015 at 06:25 PM
you likely need ball valves on the pump outlets as well. i built a CIP system with a center
inlet chugger using 1" ID tubing, 1' length tubing on the inlet side, and 3' tubing on the
outlet (in other ...
Posted in thread: Is my LHBS right? Re: Silicone Tube on 03-29-2015 at 07:08 PM
Curing is in reference to the polymerization process used to crosslink the silicone. There's
either platinum or peroxide variations:
Posted in thread: What pump for a keg/carboy washer? on 07-10-2014 at 03:51 PM
I'm probably in the minority, but I had a submersible pump lose integrity of the seal and cover
the inside a corny with oil. Although it's kind of nice to just set something up, walk away,
and come ba...
Posted in thread: Looking for a butterfly valve on 07-09-2014 at 12:22 AM
That's perfect. Could I impose on you for a pic of how you mounted yours or can you point me
somewhere that will have one? I have no idea how these work and I've been looking for a pic or
video to sho...
Posted in thread: Looking for a butterfly valve on 07-08-2014 at 12:40 AM
Where would you get one of these? That was my first choice but couldn't find anything that
would work.Head over to McMaster Carr and search for part number 4400K63. I've had it on my
RIMS system for a...