Gift Premium Subscription To outside92129

Join Date:


Last Activity:

07-11-2014 10:18 AM

Likes Given: 16

39 Likes on 34 Posts 


  • Male
  • Married
  • Carlsbad
  • CA


  • Posted in thread: What to do with this Sanke keg for AG upgrade on 07-11-2014 at 03:17 PM
    2nd, my bottom drain MLT is so nice to use. A keg as a fermenter is a pain unless you're
    willing to put in some time welding, but you'll also need a HLT and BK as well (you may be able
    to combine the ...

  • Posted in thread: Make a Blichmann Conical even better!! on 07-11-2014 at 02:59 PM
    great idea! I'm working on a similar idea but yours is definitely cleaner.

  • Posted in thread: Where to buy used brew gear? on 07-08-2014 at 05:17 PM
    Yeah, you're going to have to be patient. In general supply is limited and in demand so there's
    no easy honey source of cheap/used brewing gear.

  • Posted in thread: Propane tank frosting and inefficiency on 07-08-2014 at 05:12 PM
    I painted my tanks black and keep them in the sun during brewing, it helps a bit. I don't like
    to switch out tanks - it's a rip off (vs refilling... see other threads) and i'd lose my paint
    job!The ot...

  • Posted in thread: My First Brew Stand - an open exchange of thoughts and ideas on 07-08-2014 at 05:02 PM
    I recommend a tippy dump for the MLT, i'm sooo thankful that i added mine (and so does my
    back). I second the venting comments above. If you're using keggles then you can cut holes in
    the skirt to do ...

  • Posted in thread: New or recon kegs? on 06-30-2014 at 06:08 PM
    I second McEver distributors, and i'm in CA! I bought ~40 of them last year for our brew crew.

  • Posted in thread: brand new keggles on 05-06-2014 at 04:51 PM
    i use the sankey opening as the bottom, works great! zero head space loss!

  • Posted in thread: Re: Source for Stainless Mesh on 04-17-2014 at 03:09 AM
    i've had good luck on ebay for mesh, has decent prices on some things.

  • Posted in thread: Need photos and/or description of gas hookups on 04-17-2014 at 03:06 AM
    If you're going to use propane then 1/2" is more than you need. 1/4" is common and cheap, 1/4"
    can supply more than you need as well. I just used 1/4" copper tubing with compression fittings
    for my 10...

  • Posted in thread: Wort Monster Giveaway on 04-16-2014 at 09:01 PM
    this would make for a nice addition!heck yeaH!