Last Activity:03-24-2014 7:54 PM
Likes Given: 4
3 Likes on 2 Posts
Posted in thread: Wort Monster Giveaway on 04-22-2014 at 12:00 AM
Posted in thread: Kegerator with outlets instead of tap on 02-19-2014 at 06:23 PM
It sounds like you want some form of liquid quick disconnect on the collar, allowing you to
remove the lines if needed?While this is specified for gas, you can probably find something
similar (or just...
Posted in thread: Stout faucet - what's the concept? on 01-16-2014 at 12:51 PM
A lot of bad information here. As some others have said, Nitrogen will not go into the beer at
any appreciable amount, it is only used to push the beer through the tap. The tap itself has a
Posted in thread: STC 1000 cool outlet not working. Help! on 01-14-2014 at 08:47 PM
As you aren;t hearing the relay click, I doubt your wiring is the culprit. Most likely the
"problem" is the compressor delay.An STC-1000 will only turn on the cool side after the
compressor delay (F3 ...
Posted in thread: Spike Brewing 12.5 Gallon Conical Fermenter Giveaway! on 01-06-2014 at 07:05 PM
I suppose I could use one of these... :p
Posted in thread: Using a handle with plastic carboys. on 01-02-2014 at 05:52 AM
Better Bottles are definitely rigid enough to use a carboy handle on the neck.In fact, the
manufacturer offers 2 kinds: definitely agree with other posters that they do deform when
lifting, so be ca...
Posted in thread: How many regulators can be daisy chained off a tank valve? on 12-31-2013 at 01:47 AM
I have a 3 tap kegerator that I'd like to re-plumb the gas lines. I dispess each keg with
(possibly) different pressures. Currently I have a primary regulator with a wye fitting, one
side goes to soda...
Posted in thread: [Feeler] Any Interest in Digital Tap Lists? on 12-30-2013 at 06:27 PM
Indeed, I had been trying to just roll out a ready-to-use Kegbot in my home. However, they're
limited to 2 flow sensors with the Arduino's limited GPIO capacity. They're also pretty firmly
Posted in thread: [Feeler] Any Interest in Digital Tap Lists? on 12-30-2013 at 05:49 PM
Can you link to the model you used? This has certainly caught my attention now.I have 3x
SwissFlow sf800 got the model idea from KegBot a number of years ago. The kegbot website says
that it is food ...
Posted in thread: Natural Gas vs. Propane on 12-30-2013 at 05:38 PM
Natural gas still produces dangerous gasses (chiefly CO). Residential stoves and ovens burn
very cleanly, and normal air infiltration in the house can take care of it, but items designed
to burn more ...