Last Activity:08-03-2015 9:25 AM
Likes Given: 3
268 Likes on 201 Posts
Posted in thread: Metric vs English on 08-01-2015 at 12:17 AM
In Sweden we changed from driving in the left lane to the right lane in 1967. That was the
right (pun intented) thing to do and that kind of change is best if everyone does at the same
Posted in thread: Need Help Plumbing Water To Garage on 07-31-2015 at 05:23 PM
I ended up teeing off the supply line and soldering in a pex adapter and using all pex
fittings/valves/etc., all the pex stuff is potable. I just hated to buy a $50 crimping tool
that I may never use ...
Posted in thread: suggestions please... reducing cold break material on 07-31-2015 at 05:12 PM
My actual brewing process takes care of it for me. Most likely not applicable here but for
others that use Keggles:The port on the side of my keggle is about 3" above the lowest part of
the concave bo...
Posted in thread: Pre-heating MT on 07-31-2015 at 04:59 PM
Seems like a silly thing to use software for!You do not use the software to do THIS. You use
the software to calculate about everything you need to know about an all-grain batch...one of
those many th...
Posted in thread: Metric vs English on 07-31-2015 at 11:34 AM
The point of changing to metric, is not because it is superior, but standardized and in
widespread use.Actually, with the exception of temperature (which is a push unless we are doing
embodied energy ...
Posted in thread: Metric vs English on 07-30-2015 at 06:20 PM
To confuse dates even more, the DoD approved format now DD-MMM-YYYY where month in the
three-letter designation.There are also the various programming methods to display dates as
Posted in thread: Metric vs English on 07-30-2015 at 05:08 PM
-40 is the easiest temperature to rememberUnless we are talking Kelvin...in which case it is an
Posted in thread: The "Dear" , "Sincerely" thread on 07-30-2015 at 01:36 AM
Dear GM Engineers from the 1990's,I officially hate you with an unending passion. Seriously,
having to partially drop the engine to change the high-pressure steering hose that was already
made by the ...
Posted in thread: I just got a free 10 gallon keg on 07-28-2015 at 11:24 PM
No matter the damage, a skilled welder should be able to drill out the damage and put in a
patch...it could be a starsan/line cleaner keg if nothing else.
Posted in thread: Inkbird itc-308? $35 gets you wired, 2 stage temp controller. on 07-23-2015 at 10:53 AM
NOTE: Even though the ITC-308 is not in compliance with the NEC, the controller does work as
advertised. I am not enough of an expert to advise on how much risk may be involved with this