VIEW MY

OKHopHead

Gift Premium Subscription To OKHopHead

Join Date:

08-15-2011

Last Activity:

11-10-2012 7:25 AM

    ABOUT ME

  • Engineer
  • New to home brewing. I have yet to brew my first batch.
  • Male
  • Married
  • Tulsa
  • OK

LATEST ACTIVITY

  • Posted in thread: Electrical Help for Stir Plate on 07-23-2012 at 02:19 PM
    10k Ohm is probably way too much resistance. I doubt that you can get a useable adjustment
    range with that. To get an approximate value, you can divide the fan's rated voltage by the
    rated current. In...

  • Posted in thread: Silicone gasket on the inside or outside of a weldless fitting on 07-12-2012 at 03:21 PM
    Normally, you would want the pressure inside the vessel to aid in creating a seal. This would
    indicate placement of the gasket on the inside. However, in this case we are only dealing with
    about 1 psi...

  • Posted in thread: Best Heating Method Inside Small Chest Freezer on 10-14-2011 at 06:06 PM
    I just bought one of these for this winter:

  • Posted in thread: Cheap and easy aeration gadget on 10-05-2011 at 09:43 PM
    I have been using one of these made from a section of copper tubing and it works great. FWIW, I
    cut a bunch of copper sections and tried various configurations: crimped tube, straight tube,
    multiple h...

  • Posted in thread: Steeping Malts on 10-02-2011 at 03:05 AM
    I have been confused about this too. The two AHS extract kits I have brewed included base malts
    in the steeping grains. My understanding is that if you are steeping at 155 with base malts
    then you wou...

  • Posted in thread: 1.066 and single smack pack on 10-02-2011 at 02:47 AM
    I brewed my third batch on Friday. It is a milk stout with OG 1.066. I was planning to use dry
    American ale yeast but the LHBS was out so I purchased a wyeast smack pack. I knew these were
    designed to...

  • Posted in thread: Free Subscription to BYO Magazine on 09-30-2011 at 03:04 AM
    Me too. Thanks!

  • Posted in thread: BIAB and Partial Mash Questions on 09-26-2011 at 06:31 PM
    Currently I am using a turkey fryer to do full boil extract recipes. I am interested in trying
    a partial mash or all grain BIAB but I have a few questions:all grain BIAB: I don't believe my
    30qt kettl...

  • Posted in thread: Looking for a couple of clones on 09-26-2011 at 03:28 AM
    Two of my favorite IPA's are Rock Bottom's Hop Bomb and Widmer's X-114. Does anyone have a
    clone recipe for either of these, or a proven recipe that uses Citra hops? Extract or partial
    mash please. I ...

  • Posted in thread: First Immersion Chiller on 09-16-2011 at 07:33 PM
    I used an 8" quick tube also. It worked great. I taped one end to the tube to get started.
    Having an extra set of hands helps a lot too.

0 COMMENTS
POST A COMMENT