occhionp25

LATEST ACTIVITY

• Posted in thread: New setup- gas distributor is leaking on 09-23-2012 at 01:24 AM
  Return it. Midwest is very good about replacing defective products. My regulator was
  malfunctioning and they sent a replacement right away.

• Posted in thread: pressure relief valve on 09-09-2012 at 02:26 AM
  Anyone know where to get a new valve for this type of lid?

• Posted in thread: Broken relief valve on 09-08-2012 at 09:19 PM
  Anyone know where to get a new valve for this type of lid?

• Posted in thread: Size of the hole for the "Tower" on 09-06-2012 at 01:22 AM
  I used a 2.5 hole saw and it works great. Plenty or room for two lines, a cooling line

• Posted in thread: commercial keg issue on 08-31-2012 at 09:45 PM
  Figures it out. I'm an idiot I had the in/out reversed

• Posted in thread: commercial keg issue on 08-31-2012 at 08:24 PM
  I just hooked up my first commercial keg to my kegerator. There's nothing but foam spitting out
  and it sounds like the keg is bubbling when trying to pour. My psi is set at 12. Anyone know
  what to do?

• Posted in thread: Where to get CO2 in Akron OH on 08-21-2012 at 03:09 AM
  Look for a fire extinguisher company. I go to Gene Ptacek and Son up in Cleveland. They fill
  #10 for $10

• Posted in thread: Keg psi on 08-18-2012 at 05:16 PM
  Switched to 3/16" line and it works great. I have thought about installing a tube for cooling.
  What size is recommended?

• Posted in thread: Keg psi on 08-18-2012 at 11:44 AM
  I did roll the kegs a few times the first day but I don't think its foam in the keg. I have a
  feeling its the tubing. Up until yesterday I had 5' picnic taps on with 3/16 ID and yesterday I
  installed ...

• Posted in thread: Keg psi on 08-18-2012 at 02:26 AM
  It was set at 20 psi for a day and dropped to 10 psi for the last week. I need to release
  pressure to under 5 psi just to pour without foam and having flat beer.