Last Activity:06-06-2013 8:07 PM
5 Likes on 3 Posts
Posted in thread: OK to plug carboy when crash cooling? on 02-21-2013 at 01:58 PM
Use an air lock with vodka in it.
Posted in thread: Electrical short in control panel! on 02-21-2013 at 05:52 AM
Yeah the neutral shouldn't be connected to the switch. Since you're powering the PWM separately
you can just cap it off.You also probably have the two different sources connected somehow to
get the sh...
Posted in thread: Last RIS Thread on 02-20-2013 at 02:25 PM
What yeast are you using?
Posted in thread: Erlenmeyer? No. on 02-20-2013 at 06:21 AM
The erlenmeyer also has a nice flat bottom that won't throw the stir bar. Sometimes it's hard
to get the stir bar to stay put in a jar/jug.
Posted in thread: Electrical short in control panel! on 02-20-2013 at 03:10 AM
It's going to be hard to help without pictures since the wiring diagram you posted is not what
you really have going on.Again (from your other thread) I will ask: DO YOU HAVE A MULTI METER?
If not you...
Posted in thread: 5500W Heat Element to LED on 02-19-2013 at 10:14 PM
Do you have a multi meter? If you do, test the switch and figure out how to hook it up. If you
don't, go get one now before moving on with your build. It's really essential if you are going
to be doin...
Posted in thread: Help with eHerms - 240v/5500w elements on 02-16-2013 at 09:48 PM
You can either switch between two SSR's with a regular DPDT toggle switch between the PID and
SSR's or switch between the two elements with a contactor between a single SSR and the elements
but you wi...
Posted in thread: [Video] Dual Purpose PWM Project: Stir Plate & PWM Controller on 02-16-2013 at 01:19 AM
Thats brilliant!I'm interested in a schematic as well.
Posted in thread: 10 gallon extract batch on 02-14-2013 at 10:50 PM
Multiply by 2
Posted in thread: So I sent the wife to the LHBS on 02-14-2013 at 01:43 AM
Use your wife's pantyhose!