nicnic

LATEST ACTIVITY

• Posted in thread: Can I use Co2 to carbonate individual 2L bottles? on 03-06-2010 at 12:19 AM
  Here's a link for making your own carbonation caps for much cheaper: bought the parts but have
  yet to try it. When I do, I will be force-carbonating in a keg first.

• Posted in thread: Random Brew Pal Questions on 03-05-2010 at 08:25 PM
  #2: I believe most hydrometers are calibrated for 60 deg (it should be printed somewhere on
  yours). So, assuming you are taking a reading at 68, there is a correction required. If your
  hydrometer happ...

• Posted in thread: Brew Journal? on 01-27-2010 at 06:25 PM
  I'm currently using Excel, but when I switch to all-grain I will probably use the BJCP Entry
  Recipe Form:

• Posted in thread: How many kegs per CO2 fill? on 01-21-2010 at 06:47 PM
  Mine is ready for its first refill after going through 9 kegs.

• Posted in thread: Any mini fridges without freezers? on 01-21-2010 at 06:43 PM
  I bought a Danby DAR440BL from Walmart for $165 with free ship-to-store. It's energy star
  rated, so my electric company gave me a $50 rebate also.There's no freezer, but I had to
  replace the door pane...

• Posted in thread: Propane burners and tank service on 01-21-2010 at 06:36 PM
  Do they fill Blue Rhino tanks, or do you need a Uhaul one? My local one charges $3.97 per
  gallon... how many pounds of propane in 1 gallon?You do not need a "Uhaul tank". They will fill
  any modern one...

• Posted in thread: Which subwoofer would you get? on 12-11-2009 at 07:09 PM
  

• Posted in thread: Least expensive '1 gallon' fermenters (for test batches)? on 10-24-2009 at 09:49 PM
  I wanted to do a series of 1 gallon test batches with extra light DME and one specialty grain
  and one hop to start to learn the differences in taste and feel to these various ingredients. I
  think 1 ga...

• Posted in thread: What's your occupation: Engineer or Non-Engineer on 09-07-2009 at 02:25 AM
  Mechanical Engineer in the aerospace industry

• Posted in thread: Stuck quick disconnect. on 09-01-2009 at 09:32 PM
  Doesn't all the gas IN posts have 12 point wrench base and the beer OUT posts have 6 point
  base? As well as the different sizes.Not all of them. I have two kegs so far and one of them
  has two 6 point ...