VIEW MY

NickN72

Gift Premium Subscription To NickN72

Join Date:

02-17-2010

Last Activity:

10-23-2014 1:51 AM

1 Likes on 1 Posts 

    ABOUT ME

  • Cedar Falls, IA
  • Single

LATEST ACTIVITY

  • Posted in thread: Keg c02 leak? on 05-22-2014 at 11:49 AM
    its very possible that your co2 post doesn't seat perfectly every time you disconnect it. My
    question would be why are you disconnecting the co2? you can get a rebuild kit for the post if
    you want, bu...

  • Posted in thread: brand new keggles on 05-05-2014 at 11:53 AM
    If i were going to do it again, I would cut the bottom out of the HLT and MT and then use the
    factory spear opening as a bottom drain. i like having the side drain on my kettle so that I
    can leave som...

  • Posted in thread: What kind of pump do I need? on 05-05-2014 at 02:08 AM
    The pump will only pump as long as there is liquid in it. You'd probably be leaving a lot of
    wort in the lines. I think sanitation would be difficult as well.I think an air compressor
    could solve both...

  • Posted in thread: Crushing grains, what do u use on 05-05-2014 at 01:55 AM
    I'm using a cereal killer from adventures in homebrewing. works great and beats about every
    other roller mill on price with a base and hopper for $99 free shipping.

  • Posted in thread: What kind of pump do I need? on 05-05-2014 at 01:52 AM
    I'm not understanding what you are trying to do. Why do you need to pump wort 60ft?He is trying
    to avoid carrying the wort from the garage to where he ferments. That said I don't know if a
    march or ch...

  • Posted in thread: Do I need a ball valve on a chugger pump? on 05-03-2014 at 12:12 PM
    I should have mentioned that I am batch sparging. I use a double batch sparge method. I'm just
    tired of lifting a keg full of hot water. I guess I could get away without a ball valve as my
    goal is to ...

  • Posted in thread: Do I need a ball valve on a chugger pump? on 05-03-2014 at 12:54 AM
    The only reason you would need a ball valve on the output of the pump is if you want to
    regulate the flow. If you want full flow all the time, which it sounds like you're good with,
    then you don't nee...

  • Posted in thread: Keg to keggle parts! on 04-29-2014 at 01:54 PM
    bargainfittings.com has great prices on all that stuff plus flat rate shipping.

  • Posted in thread: Co2 usage on 02-09-2014 at 01:47 PM
    You will have less co2 used in solution with the beer, but probably lose a little more co2 in
    purging the large headspace. All together I would say you'll probably use about the same amount
    of co2 as ...

  • Posted in thread: Add water to fermented beer for volume on 02-03-2014 at 05:37 PM
    At this point you would do a lot more harm through oxidation and not getting fully mixed than
    you would good. You can do it, but IMHO you are much better off leaving it as it. Its just a
    bigger versio...

0 COMMENTS
POST A COMMENT