Last Activity:03-13-2015 2:30 AM
Posted in thread: FastFerment Conical Fermenter Problem on 03-17-2015 at 12:55 PM
I pitched my yeast right away as normal, but I had run my wort through a strainer bag to remove
most of the trub. IPA turned out great.
Posted in thread: FastFerment Conical Fermenter Problem on 03-13-2015 at 02:30 AM
Thanks everyone, for your suggestions. I sanded the top smooth and applied Teflon tape to the
threads. It works fine now. I just purchased a second one. It looks like Fast Rack may have
Posted in thread: FastFerment Conical Fermenter Problem on 02-20-2015 at 03:16 AM
I just purchased the FastFerment 7.9 Gallon Conical Fermenter and I am experiencing a problem
on the first batch. For four days, there was no bubbling in the bubbler, so I pitched more
yeast. It's now...
Posted in thread: Kegging Question on 09-10-2014 at 03:14 AM
Just filled two Cornelius kegs, but still have one in the kegerator, and it only holds two. I
typically stick them in the kegerator at 30 psi for about three days to carbonate. My question
is this: do...
Posted in thread: Kegging Dry-Hopped Brew on 09-11-2012 at 04:13 PM
I am new to home brewing. This is my sixth batch. I have prepared the "Hop Bomb" kit from
Austin Homebrew Supply. The recipe called for 5 ounces of various hops to be added to the
Posted in thread: Newbie needs advice on explosive fermentation on 04-24-2012 at 04:09 PM
Thanks for the encouragement, guys. Hopefully it will still turn out well. I'll be sure to pick
up some 1-inch diameter tubing at the Home Depot when I go to get the paint supplies and rent
Posted in thread: Newbie needs advice on explosive fermentation on 04-24-2012 at 03:26 PM
I am realtively new to homebrewing. This is my fourth batch, but I have had great success with
my first three. This one is an Imperial IPA kit from Austin Homebrew Supply. They recommended
Posted in thread: Newbie needs advice. Fermenting ended too early. on 01-24-2012 at 08:04 PM
Thanks for bearing with me guys. I am new to this.My original gravity was 1.055. I just took a
reading (just under 3 days) and it is at 1.018.Everything I read says that fermenting is done
if the fina...
Posted in thread: Newbie needs advice. Fermenting ended too early. on 01-24-2012 at 06:41 PM
I am new to homebrewing. My first batch was a light ale that turned out good. I am now on my
second batch, but having fermenting issues.This second batch is a Brewer's Best IPA kit. Two
things I did d...