VIEW MY

Navy_Brewer

Gift Premium Subscription To Navy_Brewer

Join Date:

09-30-2006

Last Activity:

09-27-2011 9:36 AM

2 Likes on 2 Posts 

LATEST ACTIVITY

  • Posted in thread: Dogfish Head 120 Min IPA Clone on 05-07-2011 at 02:16 PM
    Ok, I am thinking of trying something to get a similar beer without all the effort. Not sure it
    will work though. I am set up for 5 gal BIAB batches in an electric 44 qt pot. Batch size will
    be 3.5 ga...

  • Posted in thread: New Electric BIAB system on 04-10-2011 at 11:02 AM
    Ok, first electric brew is done. Very happy with the results but some lessons learned that
    require tweeking until this system is perfect.1. Not happy with thermometer in a T from the
    kettle drain. I a...

  • Posted in thread: New Electric BIAB system on 04-07-2011 at 11:50 PM
    Here is the picture inside the kettle as well as the final control panel layout.

  • Posted in thread: New Electric BIAB system on 04-07-2011 at 11:56 AM
    Brew52: The Element sits about two inches from the side of the pot. I think mine is a low
    density vice ULD element. I just bought what was available at Home depot. I'll try to get some
    pictures of the...

  • Posted in thread: Inexpensive 40 quart SS Pot? on 04-06-2011 at 05:27 PM
    Why not find one that fits close the spray foam the difference. Or for that matter, spray foam
    the outside of a pot to a couple of inches depth then fiberglass the outside. With some sanding
    and paint...

  • Posted in thread: Help with Auber 2352 PID on 04-05-2011 at 07:38 PM
    Is there a way to make one of the alarms normally closed on the Auber 2352 PID. I want to be
    able to set an alarm when the Strike water gets to temp but unless I go into settings for the
    Process High ...

  • Posted in thread: New Electric BIAB system on 04-05-2011 at 03:03 PM
    Thanks for the response. Sounds like the 44 qt. will do me just fine and I plan to use the 240V
    / 5500 watt element as well. My plan for the steamer basket is to take it to a local metal
    fabricator an...

  • Posted in thread: New Electric BIAB system on 04-04-2011 at 01:39 PM
    The steamer basket rests on a lip inside the pot. You can make it out in the picture above. It
    leaves about 3 inches of space under the bottom for the element, thermometer and drain. I am
    looking to f...

  • Posted in thread: New Electric BIAB system on 04-04-2011 at 11:16 AM
    Depends on the beer style you like. I think I can max out at about 12 lbs of grain, which gets
    me a 1.060 beer. To go higher means a thicker mash and the resulting efficiency drop (currently
    80% for 1...

  • Posted in thread: New Electric BIAB system on 04-03-2011 at 02:44 PM
    Well everything is moving along fast. So here it is up and running. I stayed up late a couple
    of nights to do the wiring once everything came in. Water went from 59 to 152 in 20 minutes. Up
    to mashout...

0 COMMENTS
POST A COMMENT