Last Activity:11-14-2012 8:41 AM
5 Likes on 1 Posts
Posted in thread: Favorite Nitrogen Beer on 10-20-2010 at 02:48 AM
Lefthand's 400 pound monkey on Nitro is my favorite for a Friday afternoon!
Posted in thread: Minimum Drop for March Pump? on 10-17-2010 at 01:28 AM
I had one work at a 6" drop. 18" is good.
Posted in thread: Drip tray attached to front of keezer? on 10-12-2010 at 02:54 AM
I attached mine with magnets as well. My drip catcher is made from a 2" PVC elbow and an
inverted 3" PVC cap. Works like a charm.
Posted in thread: First brew bubbles! on 08-28-2010 at 06:31 AM
Good to hear. Keep us posted on how it turns out. Like I said, as long as your sanitation is
good, you shouldn't have much to worry about.US-05 is good yeast. I use it in my sessions. It
sounds like y...
Posted in thread: I've lost the urge.... on 08-20-2010 at 04:38 PM
I don't know many brewers that enjoy clean up. Even the commercial brewers that I have known
over the years can usually think of hundreds of things they would rather do.For me, building my
brewery is ...
Posted in thread: Homebrew Club Name on 08-20-2010 at 04:26 PM
Curry County Crafters
Posted in thread: Yeast question due to lack of bubbling on 08-19-2010 at 11:20 PM
Don't dump it. As long as your cleanliness and sanitation were good, you don't have much to
worry about. Pitch the Windsor and see what happens. What do you have to lose?If you dump it
you have alread...
Posted in thread: Bottling now - need quick advice! on 08-19-2010 at 11:15 PM
Do you have a bucket without a spigot? You can just rack out of the top of a regular bucket,
(hell, run to Home Depot and get a Homer bucket or something) instead of using a spigot.I
concur. Don't tak...
Posted in thread: First brew bubbles! on 08-19-2010 at 11:11 PM
Congratulations!!!I remember the excitement of my first batch. The anticipation was unbearable.
As long as your cleanliness and sanitation practices were good, you have nothing to worry
Posted in thread: O-Ring question - used cornies? on 08-18-2010 at 08:27 PM
The only thing I would be concerned about is that o-rings deteriorate over time. When I get
"refurbished" kegs, I always do an inspection on the o-rings before use. I just roll the o-ring
over a pen o...