Last Activity:01-12-2015 9:08 PM
Likes Given: 2
5 Likes on 5 Posts
Posted in thread: My single tier build on 07-07-2014 at 02:25 PM
Ah yes, then put a hole because if you forget to light a burner and your keggle is full it is
going to suck.
Posted in thread: My single tier build on 07-07-2014 at 02:13 AM
Thanks... It's helping me to get better at welding. I made a new welder cart between the first
and second day on the brew stand. Also set up my welding plate with new legs today (needed to
be done). I...
Posted in thread: My single tier build on 07-07-2014 at 01:55 AM
Nice job so far :)
Posted in thread: My single tier build on 06-27-2014 at 03:11 AM
Thanks guys. Here it is in action from Tuesday's 10gal Hoegaarden clone brew. Screwed up and
used 2oz of bittering hops instead of 1oz. It's supposed to be around 13 IBU but probably will
be 26. Proba...
Posted in thread: My single tier build on 06-24-2014 at 02:05 AM
I realize this is an old thread, but n2fooz, I was wondering if you could tell me what material
and gauge you used for the sheet metal "floor" on your stand. Is that stainless steel?Gadams,
sorry I di...
Posted in thread: Leak found FINALLY!!! Regulator gauge... on 06-17-2014 at 05:41 AM
Disconnect all kegs, unplug fridge/freezer or better yet take all components out, turn the
pressure up and take the gauge covers off then listen carefully.
Posted in thread: Centennial Blonde (Simple 4% All Grain, 5 & 10 Gall) on 06-17-2014 at 05:23 AM
I split a 10 gallon batch into 5 gallons as is and 5 gallons dry hopped for 5 days with 1oz
each Cascade/Centennial. All I can say is WOW is the dry hopped version tasty!! :rocking:
Posted in thread: Leak found FINALLY!!! Regulator gauge... on 06-17-2014 at 05:00 AM
I've been trying to hunt down a leak that ranges from very slight to where did all my CO2 go?!
I have a 2-way primary regulator and a 3-way secondary regulator for 4 kegs. I tried using a
Posted in thread: How many gallons of BierMuncher's Centennial Blonde have been brewed? on 06-15-2014 at 03:44 AM
Plus 10 gallons. Split into 5 gal standard and dry hopped 5 gal with 1oz each
centennial/cascade.5155 + 10 = 5165
Posted in thread: looking for tap handle fitting. on 05-25-2014 at 09:30 PM
I just drilled and tapped the hardwood handles that I made. The wood is very hard and dense
though. What wood are you using?