Last Activity:01-12-2014 7:26 PM
Likes Given: 1
Posted in thread: Aphids help!! on 07-24-2012 at 04:54 AM
We bought a sack of ladybugs at the local garden store and put them all over our garden - no
more holes in my hop leaves... and the tomatoes are doing great!Good luck!
Posted in thread: looking for pump input! on 07-12-2012 at 07:34 PM
Excerpted from: vs. BSP PipeWhile NPT threads are common in the United States, BSP threads
are widely used in many other countries. •BSPT -British Standard Pipe Taper•BSPP
Posted in thread: Standing Pilot for Automated MLT on 04-24-2012 at 11:37 PM
My set up is very similar except I use NG. I beleive its all 1/4" So it looks like you need to
get rid of the ball valve feeding the pilot and put that reducing bushing in it's place. Then
Posted in thread: Standing Pilot for Automated MLT on 04-24-2012 at 08:30 PM
I think a high-voltage spark ignition with a flame detection safety would be a better
choice.Junkster:Care to share a link to what you have in mind here? The 'search' function was
not my friend on thi...
Posted in thread: Standing Pilot for Automated MLT on 04-23-2012 at 11:33 PM
I've been slowly upgrading my single-tier, 3-burner brewstand since I got it last year and now
I'm stumped... I recently upgraded my mash burner with a solenoid valve (PID controlled) and a
Posted in thread: Black Hops-Black Friday Sale on 11-24-2011 at 02:09 PM
I heard Zythos is a C blend, is that right?Seems to be conflicting info on this... I've read
that Zythos is a blend, and I've also read the following from July, 2011: "Introducing,
ZYTHOSThe third and...
Posted in thread: Denver CMC group grain buy. on 08-23-2011 at 12:26 AM
I missed out on the last one and can't imagine paying $65 for a sack of CMC pale at the LHBS...
I'd be in for 200#... sounds like we might be at 1000# without trying too hard... I'll keep
Posted in thread: So who's brewing this weekend? on 07-30-2011 at 04:27 AM
2 batches tomorrow...1) Doing a 10-gallon Stone IPA mash1a) Standard hop schedule for 5-gallon
batch1b) All Simcoe hop schedule for 5-gallon batch2) Pliny The Elder -
Posted in thread: Mash Control - Toe the Automation Line on 07-29-2011 at 02:06 PM
fish - I'd love to go electric, but that would involve running a 220V line or two out to my
garage... Considering a solenoid valve and pilot system will run less than $50, I think I'm
going to stick w...
Posted in thread: Mash Control - Toe the Automation Line on 07-28-2011 at 04:42 PM
Thanks for the reply Catt22... great to know I'm on the right path! Do you have any pictures of
your implementation of the pilot system and/or your controller setup? I'm curious where you
place the te...