Last Activity:04-12-2012 3:09 PM
Posted in thread: Blichmann HopRocket First Use (with photos) on 10-27-2011 at 04:51 PM
Thanks for the rapid response. I appreciate that its not necessary-and i believe you are
right...but i'm curious, however, why. it goes against the principle of cleaning everything. If
the hops go int...
Posted in thread: Blichmann HopRocket First Use (with photos) on 10-27-2011 at 04:36 PM
I would sanitize the hop rocket itself, after cleaning it, but there is no need to sanitize
hops.Thanks for the rapid response. I appreciate that its not necessary-and i believe you are
Posted in thread: Blichmann HopRocket First Use (with photos) on 10-27-2011 at 04:21 PM
Do you need to worry about sanitizing a Hop Rocket?How do you sanitize the hops?
Posted in thread: tubing and pumps for 60gal batch size on 05-11-2010 at 09:25 PM
I sent this to "Mark Longobardi" at March pump:I know the 809-PL-HS-C is suggested for home
brewers. Any>>>> suggestion for a slightly higher flow rate/performance pump>>>> that can also
be used at bo...
Posted in thread: 55 gallon stainless drum(s) on 04-26-2010 at 02:55 PM
Thanks Sheperd5 for replying. These are about $531 and ship from OH or Chicago. I had looked at
that site and they do look nice but appear to be NEW.I am looking for USED and local in the San
Posted in thread: 55 gallon stainless drum(s) on 04-23-2010 at 07:20 AM
I have not found any used 55 gal drums locally or on line.any suggestions for USED sources. i
can not swing the 600 bucks new...thanks.looking to modify to a conical fermenter by welding a
cone onto i...
Posted in thread: tubing and pumps for 60gal batch size on 04-02-2010 at 10:29 PM
here is the 100galon+ rig our homebrew club uses, with pics and some comments. the mashtun
wooden? Looks like a hot tub...what is it?
Posted in thread: tubing and pumps for 60gal batch size on 04-02-2010 at 05:23 AM
We are trying to scale up to about a 50 or 60 gal batch. we would like to start pumping our
liquides from one container to another. Are there any suggestions about tubing ID size and pump
size (HP and...
Posted in thread: method to solder or braze for such pipes that get hot and touch food grade water on 03-11-2010 at 05:47 PM
We need to upgrade the transfer lines from the sparge water to the Mash tun. I'd like to solder
some copper joints.If these joints heat, as the will when heating, Iím thinking there might be
Posted in thread: Designs for Conical Fermenter (Temp controlled, pump transfered) on 03-07-2010 at 07:31 PM
Hi, We have a home brew setup and want to improve the fermenter. We currently brew about 22
gallons, but hope to increase that to about 35gal soon. Or we will make two worts and transfer
both to one f...