VIEW MY

MRMcGovern

Gift Premium Subscription To MRMcGovern

Join Date:

09-22-2012

Last Activity:

05-04-2014 4:43 PM

Age:

26 years old

Likes Given: 3

    ABOUT ME

  • Male
  • Engaged
  • Wallingford
  • Connecticut

LATEST ACTIVITY

  • Posted in thread: Mypin TA4 not triggering heating element on 01-25-2014 at 03:26 AM
    That's good enough for me! When the switch is on and the SSR is closed the outlet is powered
    and the pilot light is on. When the relay is open and the switch is off, the pilot is on... I'd
    rather it n...

  • Posted in thread: Mypin TA4 not triggering heating element on 01-25-2014 at 01:08 AM
    Connect it this way:Thanks man! I'll give that a shot when I get home!

  • Posted in thread: Mypin TA4 not triggering heating element on 01-25-2014 at 12:10 AM
    Uploading second image for reference.

  • Posted in thread: Mypin TA4 not triggering heating element on 01-25-2014 at 12:05 AM
    If the indicator uses the same voltage as you are controlling with the switch (i.e. controlling
    110v w/ switch and indicator is 110v) then add a wire connecting the output of the switch to
    the indicat...

  • Posted in thread: Mypin TA4 not triggering heating element on 01-24-2014 at 06:57 PM
    Thank you guys so much for the information! It was the stupidest mistake... I had the SSR
    hooked up totally wrong... It was basically inline between the PID and outlet. I didn't even
    have 120 going to...

  • Posted in thread: Mypin TA4 not triggering heating element on 01-24-2014 at 11:51 AM
    what exactly type of TA4 do you have? is it RNR or SNR?Hey Brumateur, it's the SNR type. This
    is the exact one I ordered.

  • Posted in thread: Mypin TA4 not triggering heating element on 01-24-2014 at 11:34 AM
    If you SSR is lighting up its not the pid at all.... when the SSR it allows on hot side to make
    or break continuity and gives power to the missing leg of the element.. I would disconnect you
    element p...

  • Posted in thread: Mypin TA4 not triggering heating element on 01-24-2014 at 01:10 AM
    So I tried to attach a photo, I don't have a diagram drawn up. Hopefully you can see how the
    SSR is hooked up to the PID clear enough. I just took a meter to the output of the SSR and I
    get like 2mV :...

  • Posted in thread: Mypin TA4 not triggering heating element on 01-23-2014 at 09:49 PM
    Thanks for the response augiedoggy. I don't even know what's going on right now... I unplugged
    my PT-100 and heard the SSR click... But not when I adjust the temperature lower than the
    current temp, e...

  • Posted in thread: Mypin TA4 not triggering heating element on 01-23-2014 at 05:41 PM
    I just finished building my control panel for my RIMS, still need to fix my leaky RIMS tube.
    When I plug my t-100 probe into my controller, I can see that my set value is 100F, but the
    outlet for my e...

0 COMMENTS
POST A COMMENT